F80 437M rims

[mgfranz]

I have an opportunity to pic up a set of brand new F80 437M rims for dirt cheap, the sizes are real close, but the positive offset is different, will I be running into any fenderwell clearance issues with these rims? I am thinking of using 20mm spacers up front and 15mm in the rear. Here are the stats;

M3 Rims
Tire Size Rim WxD Positive Offset
255/35R19 9Jx19 ET29
275/35R19 10Jx19 ET40
Lug Thread Center bore
5x120 M12 x 1.5 72.6

650i Rims
Tire Size Rim WxD Positive Offset
245/40R19 8.5Jx19 ET14
275/35R19 9Jx19 ET18
Lug Thread Center bore
5x120 M12 x 1.5 72.6

[1300]

Hello all, has anyone had any issues fitting an BMW M5 wheel onto a 2005 325i? I planing on putting a set of coilovers and wasn't sure if there would be any rubbing with this size wheels?
Size for rear 245-35-19

Thank you in advance
Gav

[ChinoBMW]

1996 328I SEDAN
REARS: 18x10.5 +22 on a 225/40
FRONTS: 18x9.5 +22 215/?

thoughts on this set up

[ChinoBMW]

I have an opportunity to pic up a set of brand new F80 437M rims for dirt cheap, the sizes are real close, but the positive offset is different, will I be running into any fenderwell clearance issues with these rims? I am thinking of using 20mm spacers up front and 15mm in the rear. Here are the stats; M3 Rims Tire Size Rim WxD Positive Offset 255/35R19 9Jx19 ET29 275/35R19 10Jx19 ET40 Lug Thread Center bore 5x120 M12 x 1.5 72.6 650i Rims Tire Size Rim WxD Positive Offset 245/40R19 8.5Jx19 ET14 275/35R19 9Jx19 ET18 Lug Thread Center bore 5x120 M12 x 1.5 72.6

Dude, you're good! I think the specs are gonna make them look good mounted. For e36 this would be nice or good on e46 as well

[mgfranz]

Dude, you're good! I think the specs are gonna make them look good mounted. For e36 this would be nice or good on e46 as well

Yeah, I'm good. Put them on our E64, used 15mm up front and 20mm spacers on rear, really changed the appearance of the car, she looks meaner with them instead of the old ellipsoids. These came off a brand new M3 with 27 miles on it. And yes, a 1-1.5" lowering is in the works...

IMAG2293.jpg

IMAG2292.jpg