i do not have any factory BMW tools, but have a large assortment of pullers and press tools, have a full press set-up too.
...also tons of body/paint tools.
I cant believe I didnt post in here before but I have tons of stuff. Also a single car hauler trailer.
I'm not sure if there is a different tool necessary to reset 01+ airbag lights, but does anyone have one? I will drive a reasonable distance and bring you beer or something.
I'm near perimeter.
I think you have your pm's turned off. Can you please email me - brittany741@gmail.com so we can find a time to meet up? Thanks!
Lovely. They purged my old account from 9 years ago so I get to start over... Thanks for the email
I have a 32 mm fan wrench
46mm BMW socket for front hubs
Peake scanner
Motive power bleeder
Brake caliper tools
E-torx sockets/ratcheting wrenches for tranny removal
Angle grinder
Cordless impacts
1/2in Torque wrench that goes to 250ft lb.
3/8in that does in. Lbs.
lmk what you need I'm in Suwanee and always down to help.
770-865-7294
Last edited by 1gdsm; 12-13-2012 at 12:35 AM.
^ Will the lap top read codes for a trac light?
made a wrench last weekend to get front control arms off E36 front crossmember without having to clear room above bolts/balljoint studs (i think alternator is on one side and some sort of harmonic balancer on the other, RIGHT above the bolts)
#12 THE GREEN MACHINE - pass it to the right
Last edited by 1gdsm; 10-13-2009 at 09:33 AM. Reason: Automerged Doublepost
Who's the closest to Atlanta (I'm in the Old 4th Ward/Highlands area, but really anywhere close to midtown would be great) with the Peake tool who wouldn't mind letting me swing by and read the codes on my '04 E46? I don't mind dropping off a little cash or beer for the privilege. Thanks!
I have;
Peake reset tools for airbag and engine service
adjustible timing light w/ tachometer
sockets from 4mm up to 46mm
pressure bleeder for brakes
1/2" and 3/8" impacts
rivet gun w/ chisels
propane torch
suspension spring compressor
feeler guage, adjusting tool and remote starter for valve adjustments
tire plug kit
dynomite
Also, anyone on the southside who wants their RTABs or FCABs replaced with urethane bushings I can do this job too.
I'm willing to share with anyone on the southside. If you feel obligated to pay, I like Spaten and Sam Adams.
Last edited by peete; 02-25-2010 at 05:37 PM.
Car is a 97 528i I'm throwing this code Camshaft Position Actuator Bank 1... I've been looking and looking...cam timing and vanos???????
P1519 aka BMW code 103 - Control VANOS, end-postition fault, inlet camshaft??
Someone please help me fix it.. I will pay .. I'm going nuts!
770-789-7987
thanks
I still got those RTAB, FCAB tools for E30, E36, and E46. Tools identical to www.mistools.net
Cosmos - Black l l Lux l HK l OEM clears all around l Depo HID's 55W 5000K l Strut bar
Does anyone with an airbag reset tool want to help me out? I live in East Atlanta Village, but of course I'm willing to drive to you. I'll even pay! It's an 02 M3.
You PMed my friend your number. I'll give you a call. Thanks!
Anybody have a bearing tool kit?
Sold...82' 320i
Sold...94' 325is
Sold...85' Euro 325e
Sold...84' 318i
Current...98' M3 DAKAR
Current...81' Euro 323i
Current...94' 540i
In Marietta GA.. looking to rent/borrow an RTAB tool for an e46. Would like to do the worrk today or at least this week.
Thanks
I need to borrow/rent the SRS reset tool. I can pay with beer/food
I need a rear wheel bearing tool that will work on an E30 M3. I sent a PM to Taylor but never heard anything back, so I may be blacklisted.
Bookmarks