Looking for connector 6954554 and pins

[sl600]

Looking for the attached connector to use in a HK amplifier that is originally for the E36 but I am using it in my E31 for the DSP switch it is made by Tyco. I have sourced the connector but where do I get the actual pins that hold the wire?
IMG_9127.jpeg

[m6bigdog]

Order from a BMW Dealer.
https://www.realoem.com/bmw/enUS/sho...93#61136954554
The contacts for the connector are below the connector #8 PN.
Small wire pigtail - Contact bushing MQS with cable 0,2- 0,5 QMM 1 61130005197

[sl600]

Thanks! I will be using this to connect my E36 DSP switch to the E36 HK amp for my E31! Only uses 4 wires even though it is 6 pin.

Order from a BMW Dealer.
https://www.realoem.com/bmw/enUS/sho...93#61136954554
The contacts for the connector are below the connector #8 PN.
Small wire pigtail - Contact bushing MQS with cable 0,2- 0,5 QMM 1 61130005197

[m6bigdog]

The switch has 4 wires but the amp is only 2 wires (pins 1 & 2) in the 6 pin amp connectors.
Installing the switch at the console or next to the Fog Light SW allows you to splice the interior light dimmer, speed signal, gnd & +12v necessary for the Sound SW, from the radio X17 connector.
Then you run a 2 wire harness back to the HK Amp 6-pim connector.
I did my HK Top HiFi upgrade upgrade 20 years ago so most of what I did is a fog.
I need to look at/find my wiring harness notes, although it is pretty straight forward, just follow the E36 HK Top HiFi Wiring Diagram I posted (easy for me to say)...

[sl600]

Thanks m6bigdog but that wiring diagram is as easy as reading Greek for me! How do I know which pin is pin 1 and 2?

The switch has 4 wires but the amp is only 2 wires (pins 1 & 2) in the 6 pin amp connectors.
Installing the switch at the console or next to the Fog Light SW allows you to splice the interior light dimmer, speed signal, gnd & +12v necessary for the Sound SW, from the radio X17 connector.
Then you run a 2 wire harness back to the HK Amp 6-pim connector.
I did my HK Top HiFi upgrade upgrade 20 years ago so most of what I did is a fog.
I need to look at/find my wiring harness notes, although it is pretty straight forward, just follow the E36 HK Top HiFi Wiring Diagram I posted (easy for me to say)...

[m6bigdog]

Do what I do,
Review the E36-ETM for the HK Top HiFi wiring & connector views & E31 for the E31 stuff.
It is all there!!
http://wedophones.com/BMWManualsLead.htm