Convertible top removal

[NHinNC]

I have a chance to get a good looking convertible top for $400. there is no power available. Can I remove the top and fold it up so that I can transport it?

EDIT: I have found that there is a T40 "handle" under the little square near the front of the top. It releases the front clamps( clockwise?).
Then, there are two cables in the trunk above/behind each wheel housing.
Support the top in a vertical position, and support the rear cover vertically as well.
Plastic panels, then some plugs in the inner body metal, need to be removed to gain access to the mounting bolts by a socket(E-xx).

Now, I need to know how to disconnect the hysrolic lines. PLEASE HELP.

[NHinNC]

I found a video for an E45 top removal. I assume the E88 is very similar?
https://www.youtube.com/watch?v=dgYZZro-I5w

EDIT: that video is somewhat helpful, but the pump in the E88 is located in the trunk below and behind where the gas filler is.

chrome-extension://efaidnbmnnnibpcajpcglclefindmkaj/https://bmwtechinfo.bmwgroup.com/sib_attachments/B540708Repair_Instructions.pdf