I’m surprised no one asked about the headless person on the stairs at LeMay.
It’s a back bend crab walk up the stairs. My daughter was doing gymnastics all through LeMay as well.
Wow...what a testament to how well built your car is!
I just took a 2500 mile Road Trip from FL to PA for MPACT, but it was in my daily and not the M3. I thought man what would this trip have been like and your out here doing it. I want my build to be that reliable that I'll drive any distance. Thanks for sharing the beautiful pictures!
Mod list - M50 manifold; TechniqueTuning Stg2, Apex Arc-8, ZKW euro, clear corners Mike R diffbrace, Koni Yell with HR race
X-brace UCC tranny mounts -BLK/with enforcers, powerflex rtabs,lcabs, AAfanclutch, mishimoto rad, UCC Ultra-cerametallic Clutch.
You will go through days of joy and days of sadness as the pursuit for power leads to madness...
Merry Christmas everyone!
Here’s a mini update as a Christmas present to BF FI.......
I’ve had a pair of aluminum doors and a carbon fibre hood laying around forever waiting to be installed and it’s finally going to happen. I’ve stripped the car down, with help from Avee, in preparation for paint. New doors and hood are installed. I swapped in the carbon fibre sunroof panel in the summer. I’m having a shop do some metal work on the flares to fit some bigger rubber, fix a small rust spot & small dents, replace the windshield and do a complete paint job. I’ve just given them the M3 so I don’t expect it back for a couple of months. I’m excited!
Last edited by chikinhed; 12-26-2019 at 01:50 AM.
I like fancy
Sent from my iPhone using Tapatalk
“If liberty means anything at all, it means the right to tell people what they do not want to hear.”
― George Orwell
Merry Christmas and thanks for the update look forward to seeing the finished product!
Mod list - M50 manifold; TechniqueTuning Stg2, Apex Arc-8, ZKW euro, clear corners Mike R diffbrace, Koni Yell with HR race
X-brace UCC tranny mounts -BLK/with enforcers, powerflex rtabs,lcabs, AAfanclutch, mishimoto rad, UCC Ultra-cerametallic Clutch.
You will go through days of joy and days of sadness as the pursuit for power leads to madness...
Awesome progress.
A36 Bonanza in the background?
"Be who you are and say what you feel because those who mind don't matter and those who matter don't mind."
-Dr. Seuss
DIY BMW Tools. Charlie For President
I loved the sm10’s on my z3 coupe
Sent from my iPhone using Tapatalk
“If liberty means anything at all, it means the right to tell people what they do not want to hear.”
― George Orwell
What car will those be going on?Originally Posted by chikinhed;30388555}
Last edited by milKt; 01-01-2020 at 03:08 PM.
I am a big fan of the ARC8. Have 3 sets. You could go fancy and buy the new forged version. Mine are all cast and I have not broken any. 2 of my 3 sets have been in the road for about 10 years.
Last edited by pbonsalb; 01-01-2020 at 10:14 AM.
Last edited by GG///M3; 01-01-2020 at 08:57 AM.
“If liberty means anything at all, it means the right to tell people what they do not want to hear.”
― George Orwell
What suspension?
biden.JPG
https://fealsuspensionstore.com/feal...97-bmw-m3-e36/
Their coilovers with swift springs. Here is a better angle of how it sits
Sent from my iPhone using Tapatalk
“If liberty means anything at all, it means the right to tell people what they do not want to hear.”
― George Orwell
The plan is to graft on larger fender arches, like the e46 330i front fenders, to accommodate a square set of NT-01 315/30R18 tires on 18x10.5 et22-et27 wheels. The suspension is MCS 2WNR coil-overs with 680f 800r springs.
The shop I’m using is a classic European car restoration shop which can essentially make any panel for a car. They don’t usually work on the “low cost newer cars” like an e36 M3 but I’ve befriended the shop owner over the last few years and he has agreed to take it in. It’s the challenge of fitting the big tires and trying to maintain the stock appearance that has made him interested in the job.
Awesome. Can’t wait to see the finished work
Sent from my iPhone using Tapatalk
“If liberty means anything at all, it means the right to tell people what they do not want to hear.”
― George Orwell
Here is the starting point with the 315s installed. The fronts will probably need a 17 mm spacer with the et27 wheels. This is with a 12 mm but it rubs on the strut. The front and rear fender rework should be straight forward but trying to cover the frontal area of the tires will be a challenge. Ideally, the aft edges of the front bumper cover would be spread outward.
Last edited by chikinhed; 01-17-2020 at 10:56 AM.
Can’t wait to see how this turns out.
Sent from my iPhone using Tapatalk
“If liberty means anything at all, it means the right to tell people what they do not want to hear.”
― George Orwell
Damn it's going to be awesome.
Your turning radius will be measured in miles rather then feet.
I hope that’s not the case. We will massage it where it needs it to try to keep it under a mile.
Looks lik eyou're in need of a BigDuckClub kit. Built for setups exactly like this, and survives damn near anything you throw at it.
Keep it simple: half gutted '01 330i, welded diff, BC coils, SLR Super kit
Bookmarks