Rules: Post a picture of your Hartge mods
No matter what model/year or what kind of mod
Lets see some hartge car
One of my good mate's Hartge E30 H23
///Weisspower
adonis_bimmeror here has a hartge'd out e36
i have a hartge catback, pics up soon!
ugh i still want some 3pc hartge design e's
18x8.5 Hartge Classics with a polished lip...
On the car...
Yes, they are authentic.
I also have the Hartge exhaust on my ti, but I haven't taken any pictures of it...
-Randy
Straights are for fast cars, turns are for fast drivers. -97 Schwarz II Black 318ti Sport- Goodtimes 318ti -99 TiAg Dinan 323is -13 Scion FRS 10 Series
Now Featuring: Hartge Exhaust, 325is Vented brakes with Goodridge SS lines, clear fronts/sidemarkers (1/2 mod), Blacked out kidney grilles, Bilstein Sports with H&R Sports, E46 RSMs w/ Z3 reinforcement plates, OEM E46 M68 17" rims, 18x8.5 Hartge Classics,Gen IV DEPOs w/ 4500k HIDs and city lights
Coming soon:IF YOU HAVE A 318TI SPORT FS IN SOCAL, TELL ME!...DASCed 2.1 maybe?...or the new car mod...ALL IN ONE CAR!
Hartge Classics have always been one of my favorite wheels.
Just go to this thread, the whole thing is hartge :drool
http://forums.bimmerforums.com/forum...ghlight=hartge
Im toying with their interior tuning stuff now also. I like Hartge
RLTW
This was my last look with authentic Hartges painted matte black. They looked great, but they were sooooooooo heavy.
up
why hartge BMW so hard to find?
hartge design e
328i ACS type-II body kit w/ 3 peice wing and roof spoiler,ACS sway bars, H&R springs and TypeIII 19"2peice wheels, ACS exhaust, umintza cromium. 2-tone interior,
325i Hartge wheels, H&R racesprings, bilstiens, Zender sides, umnitza thinline , m5 trunk lip, m-tech nose slotted.
up
here is mine...
Eibach Hartge springs..
RARE Hartge 18" 3 piece wheels!!! e34 specific; 18x8.5 et13 and 18x9.5 et21 with 2.5" outer lips all around.
'95 540i/6 speed M Sport (1 of 204 produced; I wonder how many of these special editions are actually left after 17 years...)
ESS Supercharger w/10lb pulley!
full tuned stainless steel exhaust
Racing Dynamics Strut bar
Racing Dynamics Sway bar kit
JBR LTW flywheel
3.15 rear (2.93 stock)
DSSR
Short Shift kit
Vogtland Springs
Koni Yellow Adjustable
Poly engine mounts
Poly guibo
18" Staggared M pars
Full Redline synthetics
more here;
http://forums.bimmerforums.com/forum....php?t=1845901
Last edited by gixxerboy63; 11-29-2012 at 11:49 PM.
Gone but not forgotten:
'95 540i/6 M-Sport. GA65474. Alpineweiss/Parchment.
Supercharger project
^ One of my favorite wheels!
Under the knife: EMS pro standalone, wasted spark, twinscroll manifold with hybrid HX35/40 turbo, GC coilovers, E34 m5 brake conversion.
also have hartge 3 piece's
and a few fitted pics
also went for a couple of hartge badges fitted recently a boot badge and side moulding badges
*******supercharged 318is*******
I was just told about this thread by another member so I thought that I would add some pics of my collection of Hartge parts. I got hooked on Hartge a few years back and have and started collecting parts for my Mtech Hartge theme car. It started out when I found these 4x100 wheels.
They were in pretty rough shape so I had them stripped, mirror polished the lips and had them painted with ceramic paint and clear coat to get them ready for the car.
This started the addiction for more Hartge parts. So I after searching for quite some time and with some help from my friends I found the gauge cluster, gauge pod, steering wheel and shift knob. The dash was also bad in the car so I replaced that while I was having fun with the interior.
Then I came across the muffler for the car. I need to do a little body work and some welding to adapt this to the Mtech so it looks like it came that way from the factory.
I have also found the strut bar and valve cover which I am refinishing and waiting for the motor build to install.
The Mtech is still in the restoration stages and needs paint and interior. Then I came across a pretty nice E30 M3 and had to pickup another set of staggered 5x120's for that car.
Currently I am refinishing the dead pedal and will be installing that soon.
I am looking at getting another gauge pod for the M3 and some other bits as they become available.
Cheers, Jim
Last edited by shogun; 02-05-2024 at 04:50 AM. Reason: not working pic links removed
1990 M3
1995 E34 540/6
1992 525it
Gixxer did you ever get yours on, they should look awesome!
I want an e30 now!
Gone but not forgotten:
'95 540i/6 M-Sport. GA65474. Alpineweiss/Parchment.
Supercharger project
coarse spline hartge badged mtech1 wheel was a nice touch when i was still running hartge suspension.
Bookmarks