Hey boys & girls..
I have a set of USED KMac Stage 1 adjustable camber/ caster plates
for $ale. Used less then 5K miles on them.
Still in great condition.
The reason for the sale is I just upgraded to new camber plates and won't
be needing the Kmac ones, the ones I am selling.
These will fit any E36 Chasis.
Here is more information on the KMac camber plates from TMS
http://www.turnermotorsport.com/html...DUCT_ID=192416
I'll post acutal pictures later on tonight.
If you are interested please let me know.
PM is key or just post.
Thanks let me know if you are interested.
I'm located within the SF Bay area.
$150 p/u
in the bay area
These KMac Camber/ caster plates will also work for these BMW models according to TMS
Applications:
Part #: 192416
Applications: 1992 - 2006 (E36 E46 E90 E91 E92 E39 E60 E63 E64 Z3 MZ3 Z4 Z8)
This Stage I kit is recommend for street / semi-race use, and daily driven vehicles. Manufactured from steel, it includes urethane bushings and ball race thrust bearings for long life, commuter use. Adjust easily – there is no jacking or disassembly necessary! These plates provide up to three degrees of negative camber. Perfect for driving schools.
This kit fits the following BMWs:
E36 3 series, from 6/92 to 1999 (sedan, coupe & convertible) - including 318, 323, 325, 328, & M3
E46 3 series 1999-2005 - 323i, 325i, 328i, 330i (no M3!)
E90 3 series sedan 2006+ - 325i, 328i, 330i, 335i
E91 3 series wagon 2006+ - 325i, 328i, 330i, 335i
E92 3 series coupe 2007+ - 328i, 335i
E39 5 Series - 528i 1997-2003, and 540i 1997 (only)
E60 5 series 2004+ - 525i, 530i, 538i, 545i, 550i
E63/E64 6 series 2004+ - 645i, 650i coupe & convertible
Z3 Roadster/Coupe 1996-2002 - All
MZ3 Roadster/Coupe 1998-2002 - ///M Roadster Coupe
Z4 Roadster/Coupe 2003+ - 2.5i, 3.0i, 3.0si
Z8 Roadster - All
Last edited by M3x415; 04-26-2008 at 04:03 PM. Reason: KMac camber/ caster plates will work for other model BMWs
TTT
New Price
Camber Plates
$230 shipped
$200 p/u
Weekend Bump..
$150 p/u
in the bay area
noob question:
if i already have excess negative camber (from being lowered) can I use these plates to make the camber closer to stock (would be the equivalent of +2 degrees of camber adjustment)
Please PM, I may be interested.
mod list: -tint -projector lights / AE. -Projector Foglights ~clears ~black grills ~m mouldings ~x-brace ~3 spoke wheel ~ contours on fuzion zri ~microsuede headliner ~GC RSM ~Lemfoerder LCA/ Offset m3 bushings ~UUC RTAB ~Bilstein PSS
member #211 of the m42 club.
yes but it depends on what you are lowered on... these are made for co's
Bookmarks