Tools available for local DIY projects

**Dominic49** · 04-20-2011, 09:59 PM

i have the tool you may borrow it with a deposit + spicy chicken sandwich

**alen** · 04-20-2011, 10:58 PM

Great! Sent PM.

**Danny K** · 04-25-2011, 12:48 PM

anyone have a BMW balljoint removal tool for an e39?
EDIT: Member "kbsilver" rents this tool for 25$ ($100 deposit required). The tool comes complete with other tools necessary to complete the balljoint replacement on an E39.
This bad boy:

**Zodiacbw** · 04-28-2011, 04:20 PM

I've got a water pump pulley tool, 32/36mm wrench and compression tester to loan.

**carlova789** · 04-29-2011, 02:32 AM

Air bag reset tool!!! need one next month

**carlova789** · 05-15-2011, 11:32 PM

seriously need an airbag reset tool

**peete** · 05-16-2011, 01:16 PM

Originally Posted by carlova789

seriously need an airbag reset tool

What part of town do you live? I have one on the southside, Dave Markert is either in Clemson or up by Lawrenceville with one.

**stmount** · 05-17-2011, 09:16 AM

If anyone has an impact/air tools/super human strength, I have a set of Vorshlag camber plates waiting to go in.

If I could borrow or if anyone wants to assist in the install, it would be much appreciated.

**carlova789** · 05-28-2011, 10:24 AM

anyone got a 3/8 torque wrench

**subzero32** · 06-04-2011, 12:27 AM

Need RTAB tool for e36, thanks.

**ATLE36M3** · 09-15-2011, 10:58 AM

I have the full set of sirs tools for rear subframe bushing removal\installation.

this will work on e30, e24, e28, e32 and z3.

may work on other models as well.

Tony

**rdcolga** · 09-20-2011, 07:08 AM

Hey Guys, I'm looking to do the Single vanos seal & O-ring fix...

I'm looking to rent/borrow the tools needed:

CAMSHAFT LOCKING FIXTURE
TOP DEAD CENTER PIN
VANOS TURNING WRENCH
CHAIN TENSIONER LOCK PIN

I'm going to try to do the job the week after Petit Lemans

, so if anyone has these I could meet you at the race

Thanks for your time.

**idriveais300** · 09-20-2011, 03:14 PM

Hello, I'm looking to borrow someones SRS reset tool for my 98 M3. I'll gladly send you a shipping label, deposit and then return the tool to you when I'm done. I'm local (up in Cumming) and I can pick up (or just use real quick) if close where I can run out on lunch. If you have one that I can borrow, please pm me or email me at jcardin at automationdirect dot com.

**328iJunkie** · 09-20-2011, 06:48 PM

You work for automationdirect? Cool. You're welcome to stop by the shop and use mine

**idriveais300** · 09-21-2011, 08:38 AM

That rocks. Thanks. I looked through some of your old posts but couldn't find out where your shop is in Atlanta.

**Millerfleet2** · 10-08-2011, 04:32 PM

I am new this forum. I am performing a head gasket job on 1997 BMW 328i. I am in need of a T60 head bolt socket to remove head bolts. Does anyone have this?

Thanks,
Patrick
678-376-6110
millerfleet2@aol.com

**328iJunkie** · 10-10-2011, 04:22 PM

T60? You mean E12 (or 11 i forget now lol) socket? I have it.

unno

**Brandyn** · 11-20-2011, 03:33 PM

Can anyone code?

like key fob windows up, auto lock doors, etc?

**lelandr** · 11-20-2011, 03:54 PM

Anybody have the locking collar tool for Bilstein strut inserts?

It would be great if I could find one of these up the GA400 corridor, but I'll take what I can get.

Thanks

**Tibs01** · 11-25-2011, 02:19 PM

Anyone have a timing belt roller for an e30?

**peete** · 11-25-2011, 03:18 PM

Originally Posted by Tibs01

Anyone have a timing belt roller for an e30?

Looking for new or used? I have a low mile used one, but why would you risk it with anything other than new?

Originally Posted by lelandr

Anybody have the locking collar tool for Bilstein strut inserts?

It would be great if I could find one of these up the GA400 corridor, but I'll take what I can get.

Thanks

Extra large channel-locks have never let me down.

**Dominic49** · 11-29-2011, 12:36 PM

Originally Posted by lelandr

Anybody have the locking collar tool for Bilstein strut inserts?

It would be great if I could find one of these up the GA400 corridor, but I'll take what I can get.

Thanks

iirc i have one that came with the e30 325 shocks, will that wokr on the m3?