I have the following:
Cam locking tool
Flywheel locking tool
Timing chain tensioner tool
Valve spring removal tool
Peake R5/FCX3
And about $25k more in tools...
Send me PM.
Last edited by 98M345; 10-22-2008 at 10:36 PM.
I live in Duluth and have a 650 ft lb 3/4 drive torque wrench.
Great for front damper crank nuts.
Willing to rent for $20 a weekend to try to recover my costs of $200.
Also have the tool to hold the crank still to remove the nut. Fits M5 S38 and M3 S14 maybe some others.
Gary Beck
88 M5 Black/Black- 1 of 30 imported
Peoples Choice- Best 5er at The Vintage 2011
Engine rebuilt by owner 9/08
CP Pistons, B36 Cams, Miller MAF w/War Chip
Euro Headers,
Dyno@294 RWHP 345 HP at crank. 302 Torque.
Newest project- 1972 3.0CS
I have the tool to remove a M60 flywheel.
E34 525it/5 S52
E30 318is slicktop M50T
F15 X5 50i M Sport
Happy to share, but gotta limit it to Roswell/Alpharetta just to keep things simple
Multiple hex sockets (3/8) up to 17mm
19 and 36mm sockets (1/2)
1/2" torque 10-250
Peake tool
OBD II scanner/reset
Ramps and stands
Multimeter
Soldering iron and solder (would be glad to do the work in exchange for food or parts)
(growing soon)
Have Peake scan/reset tool in Marietta. Also accumulating DIY tools for oil change/mech fan tool etc.
i live in cumming i need a 32mm wrench and the tool to hold the pulley to remove my fan let me know asap. pm me
I have a OBD2 code reader for the DME, a slide hammer, full selection of air tools, thread chasers, a digital torque wrench with angle torque capabilities, Transmission detent spring bushing tools. Let me know if you need to borrow something.
I know a few people have already borrowed my Code reader and thread chasers.
I have a hammer and a saw.
I have 90% working carsoft, only ABS/ASC doesn't work. Also have a obdII scanner if anyone needs. Other than that, I don't have much else except basic hand tools.
anyone have a torque plate?
-93 325i - 296WHP w/ all ebay parts / Safc tuning-sold
Peake R5/FCX3 (1987-2000 models) CEL scanner/reset.
Search Google Maps for proximity: New Hope, Dallas, Ga 30132
Close to Kennesaw, Dallas, Cartersville, Acworth, Hiram, Lost Mountain.... others?
I just bought a wheel bearing tool for e36's and several other models. I can loan it out for a small donation to recoup my cost and cover wear and tear.
Last edited by united323is; 03-17-2009 at 08:48 AM.
I will be replacing rear sub frame bushings and rtab'ings on an m coupe this weekend that is local, im building a sub frame bushing tool but the rtab tool would be handy if someone who has one wants to swing by and help a little that would be great!
404-983-4830
Kelly
Need a Peake tool (1998) to scan codes for Engine Light. Anyone in the North Gwinn, South Hall County area? Will travel to you. Worth a couple of bucks.
I just got a new ultrasonic cleaner that is pretty large ( about two liters ) and powerful ( 160 Watts ) this isnt a cheap cleaner and really gets into all surfaces. It would be good for small items like injectors, etc. Welcome to come by and use it. I live in Holly Springs next to Canton. PM me anytime.
Anyone have RTAB/subframe mount bushing tools that will work on an e46? Please pm me! Thanks!
Greetings GA Region, me and a buddy from work are going to do the rtabs on an M3 and 323i, please pm me if you are willing to loan the rtab tool. Thanks!
I'm looking to rent a RTAB tool as well if anyone has it?
It seems to be a pretty popular request here. Perhaps we could pitch in and buy one for the community here?
Anyone? PM me or reply.
19" DPE R07 Variant S Rivetless/H&R CupKit/H&R Sway Bars/UUC Underdrive Pullies/Zeckhausen Modified CDV/Predator Chromium/ProLumen 6kHID/ActiveAutowerke StrutBar/AFE Intake/CF CS Splitters/CF Grill/Rogue RSMs/Solaris Invisbulbs[/I]
I'm thinking I might have to make one! One more try, anyone have RTAB/diff mount tools?
i need an e46 rtab tool also
Anyone have a set of Torx Plus security bits? I am looking for a 5 point T20 security torx bit.. Need to borrow it for a day to remove a buddies MAF... (Not sure why the screws are 5 pointed torx instead of 6 point)
2001 TiAg E46 M3
I'm looking to rent a rear wheel bearing tool, as well. Specifically the press that attaches to the hub and lines it up with the axle and splines. Would be for an E39...but I'm thinking that it's the same tool used across the board.
I'd need it any time next week if it's still available.
Thanks!
Dave
Bookmarks