http://store.summitracing.com/partde...5&autoview=sku
Also a32guy said he found a fitment kit with all AN fittings and lines. Who makes this?
Thats the pump I used but I didn't find any kit, I just ordered the fittings I needed from Jegs. Summit would have the same I'm sure.
Would you do it the same way if you had to do it again?
scavenge pump = waste of $ and time... I have never had any problems even with my old cheap-O ebay manifold...
Last edited by JordanMD88; 01-18-2008 at 09:16 AM.
I have a Boost Logic Oil Scavenge Pump for sale if anyone is interested BRAND new
Except for that whole cracking thing :
http://forums.bimmerforums.com/forum...3&postcount=11
A scavenge pump isn't necessary for every manifold design, but with the 666 one you are placing the turbo a bit lower than some of the log style manifolds.
You can probably get away without using it, but to some people (like me)...it's worth a few hundred dollars to have the peace of mind that a) your car won't smoke and b) to minimize any future time spent under the car wrenching on minor things.
SOLD -A dozen ///M3s of all shapes
if the turbo placement is such that it doesn't need a drain, adding a pump is only going to add a failure point. A turbo that doesn't need a drain but has a pump on its return line will have issues when the pump fails.
the electric pumps are fairly reliable. annual replacement should keep it in its safe life expectancy.
Michael McCoy TRM
Its $225 + shipping fro boost logic, if anyone wants it I will do $200 shipped...Its brand, never used...I didnt take pics of it but heres a pic from boostlogic, its exactly the same!
What are you running instead?
Reigning and Longest Tenured OT President to Date
we have the same pump and also offer a extreme duty version of that pump that we run on some outlaw 10.5 cars
here are the details on the new one
• 350F Fluid Temperature
• 3 GPM Pump Rate, 60+PSI
• Hardened Bronze Gear Pump Rotors
• 10,000 Hour Rated Dual Ball Bearings
• 10,000 Hour Rated Over-sized Brushes
• Black Anodized Extruded Aluminum Heatsink
• Nickel-plated Pump Head
• Stainless Steel Pump Head Fasteners
• 3/8" NPT F Threaded Pump Head Ports
• -6AN M Nickel-plated Adapters
• Hi-Temp Wiring
• Weatherproof Connectors
• Rubber-isolated Mounting Bracket
• Low-vibration, Quiet
• 6.2" x 4.1" x 4.1" size, 6 lbs
• 12 Volts Nominal
• 5 Amp Nominal
• Two-year Warranty
the economy version like shown in the post above is a great pump but the pump housing itself is plastic and it rated at 1.75 gpm and 300 deg
i got injectors
Bookmarks