My car took a huge chunk of ice from a truck. I'm trying to find the part number for a piece of plastic trim that goes under the bumper. It goes between the two part #9s in this diagram(I think)
http://www.realoem.com/bmw/showparts...04&hg=51&fg=15
A friend of mine called it a 'belly skin' if that helps.
Thanks.
51711977117 - Left
51711977118 - Right
RealOEM posts the part numbers under the diagrams
I've replaced these, too!!
02/1996 BMW 328i - (324,869km/201,864mi)
Purchased May 15, 2004 (101,210km / 62,888mi) Sold August 22, 2008 (324,869km / 201,864mi)
It's the way I read your post. #14?
http://www.realoem.com/bmw/showparts...48&hg=51&fg=75
02/1996 BMW 328i - (324,869km/201,864mi)
Purchased May 15, 2004 (101,210km / 62,888mi) Sold August 22, 2008 (324,869km / 201,864mi)
I was primarily thinking 14 as its the lowest on the diagram... I'll keep browsing around.
02/1996 BMW 328i - (324,869km/201,864mi)
Purchased May 15, 2004 (101,210km / 62,888mi) Sold August 22, 2008 (324,869km / 201,864mi)
That is plastic..
It is the piece that goes between the porkchops and hits the underside of the front bumper. It shreds easily and most cars are missing it.
A lot of people replace it with a JTM underpanel. I think its JTM..
Edit: Crap you are right.. I have never seen this in metal before. It is usually plastic..
I went and took a closer look at it. It's #14 or #15? Looks sort of like both...
Last edited by Jamil20; 12-19-2007 at 12:16 PM.
well 15 is the tow hook so no...14 is the cover that covers the hole for the tow hook...they are both located mid bumper...
you possibly need #2 in the following diagram...hard to tell from pics
http://www.realoem.com/bmw/showparts...32&hg=51&fg=75
you talking splash guard? mines all fed up.
2.1L Eurosport Twin screw on the 98 m3. Please send tires.
Bookmarks