Results 1 to 9 of 9

Thread: Paintless Dent Removal

  1. #1
    Join Date
    Jan 2002
    Location
    Nashua, NH / Troy, NY
    Posts
    2,102
    My Cars
    '99 Cosmos E36 ///M3

    Paintless Dent Removal

    Any good places to have this done that are pretty close to me? I need an experienced place, because it looks like I have a nasty dent as well as a crease that needs to be taken out .

    Also anyone know any place nearby that is good at paint work? Someone backed into me (hit and run) and I'm hoping I can fix it without having to repaint. Or at most just repaint the area that is messed up or just that middle section of the door (obviously I'd only want a good shop to do this so the paint matches up.)
    -Sid

  2. #2
    Join Date
    Apr 2002
    Location
    Massachusetts, USA
    Posts
    1,426
    My Cars
    '97 E36 M3 2-door, '02 YZF-R1
    Just use some Bondo and black duct tape.
    -c///m
    1997 Estorilblau M3 2-door
    Performance: JC euro intake, AA Gen III exhaust, Evosport UDP, fan delete, Schrick cams, OBD-I intake manifold, 540 HFM, ASC delete, 24# fuel injectors, DiffsOnline 3.46 40% LSD, Boston BMWCCA sticker
    Suspension: TC Kline SA (Suck-A**) coilovers, ///M front strut brace, X-brace, TCK RSM, Powerflex RTAB, Turner sways, Motorforce camber plates, RRT reinforced rear LCAs
    Lighting: ZKW w/ HID, Euro clears, Lamin-X foglight film
    Other: Z3 steering rack, SS brake and clutch lines, Stygar SSK, UUC TME, VDO Gauges, MB Quart Discus components, MB Quart Discus 6x9 triaxials, Audio Art NA 4070 280W amp

  3. #3
    Join Date
    Jan 2002
    Location
    Nashua, NH / Troy, NY
    Posts
    2,102
    My Cars
    '99 Cosmos E36 ///M3
    damn, you are just FULL of good suggestions

    Let me find some Estoril Blue duct tape too so we can both roll around in style
    -Sid

  4. #4
    Join Date
    Apr 2002
    Location
    Massachusetts, USA
    Posts
    1,426
    My Cars
    '97 E36 M3 2-door, '02 YZF-R1
    http://www.dentwizard.com/dwlocation...q=4&AutoFramed
    DENT WIZARD LOCATIONS
    For general information, please call 1-800-DENT-WIZ

    Please Call Now for an Appointment

    The Ding Protection Plan from Dent Wizard, enables consumers to pay for the removal of dents and dings in advance, at a reduced cost. For more information, please visit one of our authorized Ding Shield vendors (as noted by a Ding Shield logo) or send us an e-mail at inquiries@dentwizard.com.
    Locations for NASHUA, NEW HAMPSHIRE, USA
    CITY LOCATION PHONE ADDRESS
    Retail Sites
    MASSACHUSSETTS:
    SEEKONK DENT WIZARD RETAIL STORE 508-336-6100 999 FALL RIVER AVE
    Dealer Sites
    NASHUA SUNNYSIDE ACURA 603-880-6550 482 AMHERST STREET
    NASHUA TULLEY BUICK/BMW/VW/MAZDA & 603-888-0550 147 DANIEL WEBSTER HWY
    3 locations found
    -c///m
    1997 Estorilblau M3 2-door
    Performance: JC euro intake, AA Gen III exhaust, Evosport UDP, fan delete, Schrick cams, OBD-I intake manifold, 540 HFM, ASC delete, 24# fuel injectors, DiffsOnline 3.46 40% LSD, Boston BMWCCA sticker
    Suspension: TC Kline SA (Suck-A**) coilovers, ///M front strut brace, X-brace, TCK RSM, Powerflex RTAB, Turner sways, Motorforce camber plates, RRT reinforced rear LCAs
    Lighting: ZKW w/ HID, Euro clears, Lamin-X foglight film
    Other: Z3 steering rack, SS brake and clutch lines, Stygar SSK, UUC TME, VDO Gauges, MB Quart Discus components, MB Quart Discus 6x9 triaxials, Audio Art NA 4070 280W amp

  5. #5
    Join Date
    Jan 2002
    Location
    Nashua, NH / Troy, NY
    Posts
    2,102
    My Cars
    '99 Cosmos E36 ///M3
    bah, im not driving down to Seekonk (hour and a half away!!!) but I called the Acura dealer a little while ago. Dent Wizard guy comes down there on mondays and thursdays from 830 - 10 or 11 (depending on how much work he has), so my dad is going to bring it down there on monday morning (damn... so long from now... 3 days ) to have him look at it and hopefully do it.
    -Sid

  6. #6
    Join Date
    Feb 2003
    Location
    Boston, Ma
    Posts
    1,366
    My Cars
    '72 911S, '04 X3, '07 4Runner, '24 Model T
    I had a couple removed from BMW Peabody and it set me back 500 bucks! and they came right back! :

  7. #7
    Join Date
    Nov 2002
    Location
    New Hampshire
    Posts
    137
    My Cars
    95' Cosmos M3
    Dent Wizard goes to Euro-Sport in Merrimack about once a week ( by appointment ) I'm having them check out my car next week... (Girl bumped into my door in the snow a few weeks ago... ( was that black duct tape "Cosmos Black" )


    95 Cosmos M3
    Vis Carbon hood
    New Hella ellipsoids
    Inpro diamond clear corners
    Breyton Vision's
    Rieger Infinity 1 front bumper
    Rieger roof spoiler
    Rieger eyelids
    Rieger DTM splitter
    eibach pro-kit springs
    MA Shaw lightweight style with
    removable ext. blocks.
    Remus cat-back system
    Custom intake w/ITG foam filter
    RMS 7.5 psi stage "1.5"
    Custom Dyno tuned software
    Euro HFM

  8. #8
    Join Date
    Jan 2002
    Location
    Nashua, NH / Troy, NY
    Posts
    2,102
    My Cars
    '99 Cosmos E36 ///M3
    Originally posted by X'z95M3
    Dent Wizard goes to Euro-Sport in Merrimack about once a week ( by appointment ) I'm having them check out my car next week... (Girl bumped into my door in the snow a few weeks ago... ( was that black duct tape "Cosmos Black" )
    Oh of course, only special cosmos black duct tape for my car

    Turns out I need a new door... I'll be getting one next wednesday thats already painted cosmos black so I'll just replace mine. Hopefully paint will match otherwise I will get it repainted and blended.
    -Sid

  9. #9
    Join Date
    Mar 2019
    Location
    Baltimore, MD
    Posts
    1
    My Cars
    2001 bmw m3
    If you are in Baltimore, MD area visit https://www.arsdentrepair.com
    They did a great job repairing hail damage on my 2001 m3.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •