Member
I am installing a new clutch and flywheel right now and i have the tranny out the new flywheel pressure plate and clutch disc on but i dont have an alignment tool the one i have is to big to put into the crank. If anyone has one i could use for just an hour or two i would greatly appreciate it. i am in san jose right now and could drive to pick it up thx.
Alpine White 1999 M3 5spd Xbrace
2006 Acura TL 6spd SOLD
2000 323i 5spd w/ sport package SOLD BBS RK 17X8 - kumho ecsta MX 225/45/17 - Shark injector - UUC SSK with DSSR
Hellrot Red 1997 328is 5spd w/ sport package SOLD Dinan Cold Air Intake - Dinan Stage II Software - BB TriFlo exhaust - Eibach Pro Kit - Koni Shocks - UUC tranny mounts - 3.15LSD - UUC clutch stop- UUC 8.5 lbs stage II flywheel - e34 M5 clutch - fan delete - asc delete
Member
go buy a reg ones, make sure its smaller than the hole, then wrap electrical tape around it until it fits the slot, my cousin and
i do this, and ive seen a bmw garage do it also
JOEY | '18 M3 ZCP AW | '18 Lead Foot Raptor
D-Dogg 4 Life
Good luck Jason. Let us know how it goes.
Member
Well we just guessed and moved the clutch disc by hand and it worked first try guess i just got lucky.
Alpine White 1999 M3 5spd Xbrace
2006 Acura TL 6spd SOLD
2000 323i 5spd w/ sport package SOLD BBS RK 17X8 - kumho ecsta MX 225/45/17 - Shark injector - UUC SSK with DSSR
Hellrot Red 1997 328is 5spd w/ sport package SOLD Dinan Cold Air Intake - Dinan Stage II Software - BB TriFlo exhaust - Eibach Pro Kit - Koni Shocks - UUC tranny mounts - 3.15LSD - UUC clutch stop- UUC 8.5 lbs stage II flywheel - e34 M5 clutch - fan delete - asc delete
Posting Permissions
Reply With Quote
Bookmarks