All the settings are as per post #800 on page 32 of the DIS Success thread and the READ THIS FIRST.pdf. Configuration of DIS should be Fister as translator, vm set to not run, dsm and nsw set to run and restart EDIABAS from inside DIS to confirm the settings. What makes matters confusing is all of the "how to" videos on Youtube promoting use of Diaghead emulators etc., which are just blatantly incorrect and serve only to slow DIS down to a crawl and promote confusion. Setting up DIS on VMWare is not hard - it just takes a long time and often taking shortcuts by installing pre-configured machines with unknown settings causes more extra work than it saves. If you want to do some memory management on your virtual machine to ensure that you are not running shy on resources, it is worth defragging the virtual machine drive as this also speeds up operation of the virtual machine.
Last edited by David Mc; 11-27-2017 at 10:14 AM.
Its pretty easy once you follow everything
Boosting that post count, huh.
-Abel
- E36 328is ~210-220whp: Lots of Mods.
- 2000 Z3: Many Mods.
- 2003 VW Jetta TDI Manual 47-50mpg
- 1999 S52 Estoril M Coupe
- 2014 328d Wagon, self-tuned, 270hp/430ft-lbs
- 2019 M2 Competition, self-tuned, 504whp
- 2016 Mini Cooper S
Bookmarks