Hi,
does anybody know the settings in GT1/DIS to use the same diagnose interface for INPA/Ediabas, without use the expensive diagnostic head ?
(Sorry for my English...)
Regards
I know how to do it, but I need something in change:
WinKFP, NFS, NCS Expert and password, fully working...
Hey, Nuvola...how would you do it? I have some nice app's to trade Including EDIABAS, Gt1 V29-49. and a few goodies.
It was pretty clear over there, if you have that thread you know everything you need.
Could you post the thread? I'd be more then happy to help I just need something to go on, haha.
@MPower2007
On the DIS Mainscreen you must put Strg+Alt+F1 to go to the first sco console.
Login as root and pwd "password". Then change to the directory /etc and modify (vi ediabas.ini) the file.
[TCP]
RemoteHost = Diaghead
Port = 6801
Then extend the file /etc/hosts with following information:
"192.168.68.30 Diaghead"
after reboot, go to the console and type
/usr/ediabas/bin/apitest"
if it runs and give you a menu then the comminucation between ediabas-SCO and ifhsrv is ok.
@ eleet
What settings must be done to connect DIS to the SCO ediabas ? DIS -> Services -> Settung up a connection -> Free Diagnostic heads are empty. Please help me - Thx
Sorry for my bad english.
Hello MPower2007
Sorry this was the wrong IP. In /etc/hosts must stand
"192.168.68.1 Diaghead" and your windows system with ifhsrv running must have this ip. After the change you can "ping Diaghead" and execute apitest.
What for a Interface you are using ?
@all other
What settings must be done to connect DIS to the local ediabas - In DIS Administration - Free Diagnostic heads are empty. Please help - Thx
Can you ping to 192.168.68.1 / Diaghead ?
Rapidshare deleted.
Thanks Mpower, it was nice to get the articles I posted on the other board back.
Could you reshare or send private to email OBD_diagnose_with_round_20pins_-_318ti_org_forum.zip
Thank's in advance
Any chance of getting a copy of that post? dfitz21@gmail.com
Thanks
Dan
Thanks!!
Could you please private email me the link for this? Thank you in advance
seanshultz@hotmail.com
Anybody use an ADS Interface for DIS?
i need so much help ....
sincerly
Please somebody send me link or file OBD_diagnose_with_round_20pins_-_318ti_org_forum.zip
Thanks.
engine387@gmail.com
I would like that have that zipped thread also..
thanks,
fraatti@suomi24.fi
Can you share the Zip file OBD_diagnose_with_round_20pins_-_318ti_org_forum.zip as well
I would really apreciate it.
Abed.Shamlawi@Y-Consult.com
after doing this insruction. On the DIS Mainscreen you must put Strg+Alt+F1 to go to the first sco console.
Login as root and pwd "password". i get and error incorrect logon can someone help me please.
Bookmarks