you might blow a gasket
only use high octane when turboing
What is the optimal rear suspension setup for drag racing a turbo car. What kind of spring do I want? What kind of camber/toe/caster?
I rolled my fenders this weekend and installed the TC Kline rear height adjusters ontop of H&R sport springs.
I added 1'' on each side and there is no more rubbing with the 235x60x15 ET Streets.
What kind of setup do I need to get these tires to hook?
TEC-3R, T4 GT40, WISECO, EAGLE, SUPERTECH, O-RING'D "FRANKENSTEIN" STROKER.
Get a pal to video your car on hard launch. The end result you want when your suspension is optimal is that the rear tires are at zero camber at the hit. This will require a lot of suspension tweaking.
Hint: if your rears are at negative camber at stand still, you're not going to be neutral on the launch.
.-=[ Kenny ]=-. See the BFc Drag Racing Standings List for BMW street cars. Watch my drag racing movies on YouTube. Some info on
BMW turbo street car Drag Racing 101
TEC-3R, T4 GT40, WISECO, EAGLE, SUPERTECH, O-RING'D "FRANKENSTEIN" STROKER.
Kenny, were should the launch rpm's on the two-step be? Or, what would you recommend as a starting point?
Also, do you have your two step activated by your line locker?
One more, do you have the antilag comming on with the two step?
-Dave
TEC-3R, T4 GT40, WISECO, EAGLE, SUPERTECH, O-RING'D "FRANKENSTEIN" STROKER.
Again the posts are locked so I can no longer edit them to udpate new entries.
- Mickey Thompson ET Street part number 3793 -> 26"x11.5"-16
+ Tread width 9.7" (Can fit on rims 9"-11")
+ 26.2" tall and 82" circumference
+ Sidewall width: 10.8"
+ Credit: Mike Radowski
.-=[ Kenny ]=-. See the BFc Drag Racing Standings List for BMW street cars. Watch my drag racing movies on YouTube. Some info on
BMW turbo street car Drag Racing 101
I learn something today!
Thanks Kenny!
very nice
BMW-PC F80 M3 HotLap │ Formula 1000 Video │ 3 Time NASA-SE GTS2 Champ │ TRM Stg.2, Coilovers & Tuning │ Racing Videos[/CENTER]
I never did it, I wimped out haha.
cheers! nice work
e39
BMWPOWER
nice write up! I should of read this thread before i went to the strip tonight. Oh well next time
Last edited by ptsbmw; 03-06-2009 at 11:28 PM. Reason: mispelles
1995 M3
AA Gen 3 exhaust, trackpipe, 17x8 rondell cross spokes, UUC evo3 shifter, X-brace, Radowski diff support, Blistein sport/ H&R Sport springs, V1 Blower vortech kit 11 lbs. , 46 lbs. inj. , Porsche 803 Hfm, and AA / max psi tune.
Nice to know about the drifting race in detail and its very useful for the racers and even the people who are in audience enjoy it a lot because its a drifting event and many new aspects are seen on the tracks.I like it so much,and would like to go.
Nice write up !! Im probably going to use some of this on the street lol
.-=[ Kenny ]=-. See the BFc Drag Racing Standings List for BMW street cars. Watch my drag racing movies on YouTube. Some info on
BMW turbo street car Drag Racing 101
Reviving this thread to say thank you for the awesome write up.
Additionally, it looks like the 3743R are no longer available, but MT came out with a new version 3470. Seems to be pretty much same sizes all around.
https://www.summitracing.com/parts/mtt-3470
Hopefully eventually trying these out once the cars together.
.-=[ Kenny ]=-. See the BFc Drag Racing Standings List for BMW street cars. Watch my drag racing movies on YouTube. Some info on
BMW turbo street car Drag Racing 101
Bookmarks