Diy Video Library

[millertimebmw03]

yes. some people have had issues.
yes. i thought about doing it myself, but decided to leave your thread to you.

it does look better though, doesnt it?

IT does! Thanks for showing me how! The car looks so much better with the dog ears all done. Can you imagine that I have never had them like this before??????

[325isNyC]

Hey miller time, can you do a video diy on changing your fuel filter. I have a 93 325is and the fuel filter is located underneath the driver side seat and it is impossible to get to. I can reach and unbolt the clip to the inlet hose but I cant seem to reach the outlet hose clip. Let me know what you think. Thanks.

[first time]

The talent some of you guys have is really amazing. Wish you lived next door. I have begun to do several small diy projects thanks to the diy project list on places like Pelican and here. It's very satifying and you boys that provide this info are true to be respected.

Now where are the links to your vids?

[palomino]

Hey miller time, can you do a video diy on changing your fuel filter. I have a 93 325is and the fuel filter is located underneath the driver side seat and it is impossible to get to. I can reach and unbolt the clip to the inlet hose but I cant seem to reach the outlet hose clip. Let me know what you think. Thanks.

i believe the position of his fuel filter is different from yours. have you read write ups for this? its not a convertible-specific problem. directions for any early e36 6 cylinder coupe, sedan, or convertible will work.

they changed it with the OBD II cars, i believe.

IT does! Thanks for showing me how! The car looks so much better with the dog ears all done. Can you imagine that I have never had them like this before??????

your c-pillar panels have been broken since you got the car?

[325isNyC]

Thanks the for the response Palomino. I have read many DIY on this topic and I have looked at 2 books that I currently own. However, I checked the position of my fuel filter and it is impossible to reach the outlet hose from under the car. I am planning on swapping out my PS reservoir Monday so I am going to be taking out my intake manifold so I'll see if I can reach the outlet clamp from the engine bay.

[palomino]

Thanks the for the response Palomino. I have read many DIY on this topic and I have looked at 2 books that I currently own. However, I checked the position of my fuel filter and it is impossible to reach the outlet hose from under the car. I am planning on swapping out my PS reservoir Monday so I am going to be taking out my intake manifold so I'll see if I can reach the outlet clamp from the engine bay.

good luck with that.

i have a friend that changed the fuel filter on his 92 e36, so its definitely possible.

i hate projects that seem impossible, and you just have to keep messing with it until something breaks or until you figure it out.

[TreibeFroh]

Changing all my filters this weekend... except the fuel filter.

It's worth the money to me to let someone else mess with that one.

[Lys]

Hi,
a video guide for tension straps and rear window is amazing for me, i want to fix the straps and a video can help me a lot.

if you are interested i did an analog clock to 18 button OBC retrofit guide, it's in italian but there are many pictures that can helps.

www*lys*it/bmw

p.s. replace * with dots, i can't post links yet...

www.lys.it/bmw

[millertimebmw03]

NEW VIDEO'S UP!!!! ENJOY!!!!
Make sure to post-up comments

[325isNyC]

Hey millertimebmw03, in the seafoam video, why did your CEL come on again? I am planning on seafoaming my engine next week and would like to avoid any CEL. Thanks.

[millertimebmw03]

i let the car die when i first started the car again, also I used alittle too much seafoam (you should use 1/3 the bottle )

alotta fun to-do it too

[NiTrOuSoXiDe]

Just watched the dog ear video. You f*cking rock dude. =)

Now please show me how to make my top work normally again! Also the non-noisy top would be cool too.

Thanks so much!

[Jimmie Jazz]

Just watched the dog ear video. You f*cking rock dude. =)

...

Thanks so much!

+1 Great job!

[325isNyC]

i let the car die when i first started the car again, also I used alittle too much seafoam (you should use 1/3 the bottle )

alotta fun to-do it too

Thanks for the response. I like the actron code reader tool you have. Can that plug into an OBDI? Also, can you reset your srs and oil service light with that tool?

[jasontn]

Millertime, I have been on youtube and saw the seafoam video but havent seen the others...like the dog ears. I have searched under your name but cant find them. Where should I be looking?

[millertimebmw03]

Millertime, I have been on youtube and saw the seafoam video but havent seen the others...like the dog ears. I have searched under your name but cant find them. Where should I be looking?

I'm trying to get a different account with youtube (larger file size) because this last video was 14min and there max is 6min. I think. You can see all of the videos on the first page of this thread in blue. I'll let everyone know when I can fit it on youtube, but it's on "putfile" for now.

[millertimebmw03]

Thanks for the response. I like the actron code reader tool you have. Can that plug into an OBDI? Also, can you reset your srs and oil service light with that tool?

No, this was a borrowed tool from "autozone" and it works on ODB-II only, sorry. You can use the stomp test for your car though. I think the key is to clicks foward and press the pedal to the floor five times and the check engine light will blink with the coresponding code. And the autozone one is only good for the "check engine".

[TreibeFroh]

Nevermind

[fallenwout]

GREAT idea millertimebmw03!!! vbmenu_register("postmenu_9099813", true);

[millertimebmw03]

The New Video is on the first page Thanks

[GottaLoveAvus]

sounds good, an yes a pulley video would be great, ill be changing my oil soon so maybe ill make a "how to change your oil video"

[riz325]

my friend you are life saver

now i can do this and my car will look so much better from inside

i thank you for all the hard work that you have put into doing these videos

YOU WILL BE SAVING PEOPLE LOADS OF MONEY

[millertimebmw03]

my friend you are life saver

now i can do this and my car will look so much better from inside

i thank you for all the hard work that you have put into doing these videos

YOU WILL BE SAVING PEOPLE LOADS OF MONEY

Hey, no problem. I do it because I'm always taking information from everyone on here I just wanted to give some back ^_^ but I have a bank account if you'd like to share some saved money

[millertimebmw03]

Is the put file link working for all of you?

[NiTrOuSoXiDe]

Will someone sticky this thread already?