help with throttle body connections

[djbeatz08]

i just replaced the knock sensors and puttin things back together there is a plug for the throttle body that I can't see what it connects to. There is the one connection on the throttle body that has a 3-pin connector similiar to that of the knock sensor and then this one that im missing. its oval shaped 2 pin connector. Any ideas as to where the connection for this sucker is?

[mdh]

If you have traction control (ASC+T) you have an electrical connector that attaches to a throttle valve switch mounted on the top side of the secondary throttle housing (between rubber boot and main throttle housing). There is also a throttle position switch (TPS) attached to the back side (faces towards firewall) of the main throttle housing.