Brembo Brake Rotors - Solid, Crossdrilled, and Slotted - Lowest Prices Online!!

[~CB]

For 93 325is was what I was looking at:

Slotted: --- Front: PN 45325 $180 --- Rear: PN 45144 $155 --- Full Set: $335

I could be wrong, but for some reason I had $310 down for that set. Some of the other prices of 3-series are up to 3 grand. That's why I asked.

[importrp]

For 93 325is was what I was looking at:

Slotted: --- Front: PN 45325 $180 --- Rear: PN 45144 $155 --- Full Set: $335

I could be wrong, but for some reason I had $310 down for that set. Some of the other prices of 3-series are up to 3 grand. That's why I asked.

Thanks, I see what you are saying. That must have been one of the ones I edited the part #'s on. I had the wrong rear # in there for a bit, noticed, and changed it. It should all be accurate now.

I could probably do it for $330. However, to be honest our cost on those is actually above $310. There is just little markup in the Brembo cast-in authentic drilled or slotted.

Thanks for helping me clear that up

Best Regards,

Jeff

[pyro]

Front pair only with Axxis Ultimates, shipped ground to 95032?

This application:
1996-98 BMW 328i, is (E36)
Solid Faced: --- Front: PN 25325 $80 --- Rear: PN 25144 $52 --- Full Set: $125



EDIT:
Never mind, that is a long OP, went to website. It is $145.28 out the door WITHOUT the discount. Knock it down to $130? If so, deal!

[importrp]

Front pair only with Axxis Ultimates, shipped ground to 95032?

This application:
1996-98 BMW 328i, is (E36)
Solid Faced: --- Front: PN 25325 $80 --- Rear: PN 25144 $52 --- Full Set: $125



EDIT:
Never mind, that is a long OP, went to website. It is $145.28 out the door WITHOUT the discount. Knock it down to $130? If so, deal!

Wouldnt it be this set:

1984-92 BMW 325e, es, I, ic, is (E30 Excluding 4wd)
Solid Faced: --- Front: PN 25252 $60 --- Rear: PN 25080 $52 --- Full Set: $110

The Ultimates would be $72 and shipping would be $20. So the total would be $202. Not sure what you mean by "long OP", I went off the application listed as your vehicle.

Let me know if this is right.

Thanks,
Jeff

[importrp]

Just put up a brake pad deal, it can be seen here: PBR/Axxis Brake Pad thread

Thanks again guys

Regards,
Jeff

[~CB]

Ok, paypal sent. I hope I figured my shipping correct, got it from your site.

Gracias,

-Craig

[importrp]

Ok, paypal sent. I hope I figured my shipping correct, got it from your site.

Gracias,

-Craig

Did perfect. Should take no more then 3 business days for you to get it... So I would say approx delivery date of Tues the 29th or earlier. Also, sent you a copy of the sales receipt.

Thanks again for the order, we greatly appreciate your business!

Best Regards,

Jeff

[pyro]

Wouldnt it be this set:

1984-92 BMW 325e, es, I, ic, is (E30 Excluding 4wd)
Solid Faced: --- Front: PN 25252 $60 --- Rear: PN 25080 $52 --- Full Set: $110

The Ultimates would be $72 and shipping would be $20. So the total would be $202. Not sure what you mean by "long OP", I went off the application listed as your vehicle.

Let me know if this is right.

Thanks,
Jeff

Negative, it is for an e36 328is. This is for the FRONT only. The figures are accurate. $130 OK?

[importrp]

Negative, it is for an e36 328is. This is for the FRONT only. The figures are accurate. $130 OK?

Ok, so it would be:

ROTORS:
1996-98 BMW 328i, is (E36)
Solid Faced: --- Front: PN 25325 $80 --- Rear: PN 25144 $62 --- Full Set: $135

PADS:
Ultimate: -Front- PN: D 759 RU $42 (Got this GB up)

SHIPPING:
UPS Ground ($16.31) - I'll just do it for $15

So the total would be $137. That should be an extremely good deal. Sorry about the confusion on your earlier post.

Thanks again,
Jeff

[importrp]

Bump for the evening browsers Thanks guys, we appreciate all of the business!

Best Regards,
Jeff

[NickAD]

How much for a full set of slotted rotors for a 1999 540 including axxis ultimates shipped to 91362?

Thanks,
-Nick

[importrp]

How much for a full set of slotted rotors for a 1999 540 including axxis ultimates shipped to 91362?

Thanks,
-Nick

Thanks Nick! Shipping would be $35 (Heavy, 80 + lbs). Rotors would be $425
for the full F&R sets. Pads would be $105 for the full F&R sets. Therefor the total would be $565 shipped. Should be a GREAT deal!

Thanks again,
Jeff

[NickAD]

Oh, could you calculate that back up with a liter of ATE super blue fluid and the front wear sensor?

Thanks,
-Nick

Oh yea, and if you happen to carry any SS brake lines for my car that would be great as well.

[Drivehard]

bump for a great seller, I bought front and back brembos for my e36 and not only did i get the best price anywhere but he went out of his way to meet up with me so that i could pay in cash and not deal with shipping.

Jeff is a great guy and a trusted seller. i would definately buy from him again.

[importrp]

Oh, could you calculate that back up with a liter of ATE super blue fluid and the front wear sensor?

Thanks,
-Nick

Oh yea, and if you happen to carry any SS brake lines for my car that would be great as well.

Ok, the sensor would be $10 and fluid would be $12. So that would add $22 to the total, making it $587.

If you want the lines, we have Goodridge for $109.

Thanks again!
-Jeff

[importrp]

bump for a great seller, I bought front and back brembos for my e36 and not only did i get the best price anywhere but he went out of his way to meet up with me so that i could pay in cash and not deal with shipping.

Jeff is a great guy and a trusted seller. i would definately buy from him again.

Thanks for the feedback, I just left you some feedback on your itrader thing, if you could do the same that would be awesome! Enjoy the brakes!

Regards,
Jeff

[NickAD]

Ok, the sensor would be $10 and fluid would be $12. So that would add $22 to the total, making it $587.

If you want the lines, we have Goodridge for $109.

Thanks again!
-Jeff

Cool. I'll take all that and the lines as well then.

So, just to sum it all up, for a 99 540/6 shipped to 91362
-Full set of Brembo slotted rotors
-Full set of Axxis Ultimates
-Front wear sensor
-1 liter of ATE Super Blue brake fluid
-Goodridge stainless steel braided brake lines


Thanks!
-Nick

[Eddy@ApexRaceParts]

do you have rotors for an 88 e30 m3? I would be interested in a set of REAR, cross drilled rotors to 94526

[importrp]

Cool. I'll take all that and the lines as well then.

So, just to sum it all up, for a 99 540/6 shipped to 91362
-Full set of Brembo slotted rotors
-Full set of Axxis Ultimates
-Front wear sensor
-1 liter of ATE Super Blue brake fluid
-Goodridge stainless steel braided brake lines


Thanks!
-Nick

Yep, that is correct. If you want to add the lines, the new total would be $696. We can ship today if you want to order. Please let me know.

Thanks again,

Jeff

[importrp]

do you have rotors for an 88 e30 m3? I would be interested in a set of REAR, cross drilled rotors to 94526

From what I can tell brembo doesnt make anything. We do have Zimmerman drilled. Want a price on those?

Thanks,
Jeff

[NickAD]

Yep, that is correct. If you want to add the lines, the new total would be $696. We can ship today if you want to order. Please let me know.

Thanks again,

Jeff

Sounds good to me. I'm ready when you are.

I'll probably order by way of paypal. Or phone order, whatever is easiest for you.

[importrp]

Sounds good to me. I'm ready when you are.

I'll probably order by way of paypal. Or phone order, whatever is easiest for you.

We prefer CC orders, as our fees are much less than paypal. However, whatever is easier for you is ultimately what we would prefer

If you want to paypal, just send the total to paypal@importrp.com, if you want to order on the phone give us a call at 425-357-6818.

Thanks again,
Jeff

[~CB]

Hi Jeff,

Nothing as of yet. Who is your shipper-USPS, UPS, FedEx? I can put a UPS slip out for brown if its them. Makes it easier on everyone.

Thanks.

[Eddy@ApexRaceParts]

From what I can tell brembo doesnt make anything. We do have Zimmerman drilled. Want a price on those?

Thanks,
Jeff

could I get a shipped quote for that please?

[importrp]

could I get a shipped quote for that please?

I could do them for $120 shipped, in stock and ready to go!

Thanks again,

Jeff