Okay I'm going to be doing this tomorrow but want to clarify a few things. In the instructions it is said that the Crank Vent/ICV bracket needs to be modified...how exactly does it need to be modified (cut, bend, drill?)? Also what is "slightly modified" with the manifolds you are selling. My manifold has a hole, I'm not sure exactly what is supposed to go there. Heres a pic
Lastly, do you know where I can find a few more pics of the IAT sensor, crank vent, and vacuum canister and their associated wires/tubes?
Thanks
Edit: sorry that pic is so big i dunno how to resize it
For Sale: 18-button OBC and X1071 wire connector,, black coupe mirrors, and fog light brackets
Eric Paul Eviston - 1 Piece Silicone Hose M50 Manifold Conversion Kit
******M50 Manifold Install Trouble Shooting Guide Here: www.m50manifold.com
'98 M3/4 - ECIS CAI, S50 Manifold, Conforti Software, 16" Spal Puller, UUC Pulleys, Fan Delete, UUC Stage 2 Fly w/M5 Clutch, UUC Blacks w/TMEs, X-Brace, GC RTAB shims, GC RSMs,
M Roadster lever, 245x40x17 all 4 corners, Drilled Zimmermans, Motul RBF600 and Redline Synth fluids. My Dyno HERE
My Website: www.m50manifold.com
My Email: info@m50manifold.com
5 kits went out today!!
Eric, yours too...sory for the mix-up.
If you didn't get your tracking numbers automatically let me know and I'll forward them to you.
Thanks for the orders.
Eric
Eric Paul Eviston - 1 Piece Silicone Hose M50 Manifold Conversion Kit
******M50 Manifold Install Trouble Shooting Guide Here: www.m50manifold.com
'98 M3/4 - ECIS CAI, S50 Manifold, Conforti Software, 16" Spal Puller, UUC Pulleys, Fan Delete, UUC Stage 2 Fly w/M5 Clutch, UUC Blacks w/TMEs, X-Brace, GC RTAB shims, GC RSMs,
M Roadster lever, 245x40x17 all 4 corners, Drilled Zimmermans, Motul RBF600 and Redline Synth fluids. My Dyno HERE
My Website: www.m50manifold.com
My Email: info@m50manifold.com
kits still for sale?
Eric Paul Eviston - 1 Piece Silicone Hose M50 Manifold Conversion Kit
******M50 Manifold Install Trouble Shooting Guide Here: www.m50manifold.com
'98 M3/4 - ECIS CAI, S50 Manifold, Conforti Software, 16" Spal Puller, UUC Pulleys, Fan Delete, UUC Stage 2 Fly w/M5 Clutch, UUC Blacks w/TMEs, X-Brace, GC RTAB shims, GC RSMs,
M Roadster lever, 245x40x17 all 4 corners, Drilled Zimmermans, Motul RBF600 and Redline Synth fluids. My Dyno HERE
My Website: www.m50manifold.com
My Email: info@m50manifold.com
how much is the kit shipped to 11428?
Last edited by BMWALDO; 12-26-2006 at 01:23 PM. Reason: Edited cause I was off 5 bucks. :(
Eric Paul Eviston - 1 Piece Silicone Hose M50 Manifold Conversion Kit
******M50 Manifold Install Trouble Shooting Guide Here: www.m50manifold.com
'98 M3/4 - ECIS CAI, S50 Manifold, Conforti Software, 16" Spal Puller, UUC Pulleys, Fan Delete, UUC Stage 2 Fly w/M5 Clutch, UUC Blacks w/TMEs, X-Brace, GC RTAB shims, GC RSMs,
M Roadster lever, 245x40x17 all 4 corners, Drilled Zimmermans, Motul RBF600 and Redline Synth fluids. My Dyno HERE
My Website: www.m50manifold.com
My Email: info@m50manifold.com
6 kits went out today.
Joe, I had to send yours USPS so there is no tracking number.
Zack, your connector went USPS too.
everyone else should've gotten their tracking numbers from quantum view.
now taking orders for next week.
Eric
Eric Paul Eviston - 1 Piece Silicone Hose M50 Manifold Conversion Kit
******M50 Manifold Install Trouble Shooting Guide Here: www.m50manifold.com
'98 M3/4 - ECIS CAI, S50 Manifold, Conforti Software, 16" Spal Puller, UUC Pulleys, Fan Delete, UUC Stage 2 Fly w/M5 Clutch, UUC Blacks w/TMEs, X-Brace, GC RTAB shims, GC RSMs,
M Roadster lever, 245x40x17 all 4 corners, Drilled Zimmermans, Motul RBF600 and Redline Synth fluids. My Dyno HERE
My Website: www.m50manifold.com
My Email: info@m50manifold.com
If I were to install the manifold conversion kit, is there anything else that I need to upgrade also (HFM, intake, throttle body, ect.) or can I place this in a bone stock engine??
Eric Paul Eviston - 1 Piece Silicone Hose M50 Manifold Conversion Kit
******M50 Manifold Install Trouble Shooting Guide Here: www.m50manifold.com
'98 M3/4 - ECIS CAI, S50 Manifold, Conforti Software, 16" Spal Puller, UUC Pulleys, Fan Delete, UUC Stage 2 Fly w/M5 Clutch, UUC Blacks w/TMEs, X-Brace, GC RTAB shims, GC RSMs,
M Roadster lever, 245x40x17 all 4 corners, Drilled Zimmermans, Motul RBF600 and Redline Synth fluids. My Dyno HERE
My Website: www.m50manifold.com
My Email: info@m50manifold.com
Another stupid question... will this upgrade delete my ASC system (b/c you delete the ASC throttle body right?), and if so, can/should I keep it?? Along with this kit, I want to add a Conforti Intake and Shark it. Any other suggestions or better ideas??
And with me being that customer, I also have to say that I put on my ECIS shortly after having Eric install his manifold kit, and it's great!
To top it all off, I took the car in for a smog check yesterday (1/3/07), ECIS on (CARB legal) with Eric's conversion, and it passed without a hitch! I just kept the car idling to keep the cats hot while I waited for my turn on the machine.
dion
'00 M roadster, modded
'98 SVT Contour, lots of mods
'04 Sienna XLE LTD AWD
'08 MB C300 Sport, P1, 18's
Tamiya TA05, Evolution IV MS, CR-01
Kyosho MP777 SP2
Losi BK2 and MRC
Traxxas Slash, hopped-up.
newest toy is the Tamiya TRF801XT
Eric,
I sent you some money. I'm looking forward to the install! Thanks
It has been a month since my install. The instructions took care of most of my questions. I had few rather specific questions for Eric that he answered promptly.
In progress...
All done.
The real surprise is the change in the intake sound. If you have a CAI, you will love the change. Throatier, more angry. The power boost was even noticed by my seat cover (the wife).
Thanks again, Eric. Great service!!!
Hi,
I'm new to this mod and from reading all the reviews, I am very interested. Just wanted to cofirm a few things before I go for it. I currently have JC software and CAI, will this bolt right to my existing TB? Thanks.
Will this kit be plug-n-play with a Dinan throttle body?
Eric Paul Eviston - 1 Piece Silicone Hose M50 Manifold Conversion Kit
******M50 Manifold Install Trouble Shooting Guide Here: www.m50manifold.com
'98 M3/4 - ECIS CAI, S50 Manifold, Conforti Software, 16" Spal Puller, UUC Pulleys, Fan Delete, UUC Stage 2 Fly w/M5 Clutch, UUC Blacks w/TMEs, X-Brace, GC RTAB shims, GC RSMs,
M Roadster lever, 245x40x17 all 4 corners, Drilled Zimmermans, Motul RBF600 and Redline Synth fluids. My Dyno HERE
My Website: www.m50manifold.com
My Email: info@m50manifold.com
Thanks Eric. I'm itching to place my order today, but I've gotta wait until my next payday.
Yes it will. In fact I've been told that if you have a bored TB you almost have to use my TB seal because if you use the plate between the 2 seals the hole in the plate is not big enough to keep it out of the way. The edges of the plate protrude into the venturi, and it causes turbulent air flow into the manifold.
Maybe someone here can back that up.
Eric
Eric Paul Eviston - 1 Piece Silicone Hose M50 Manifold Conversion Kit
******M50 Manifold Install Trouble Shooting Guide Here: www.m50manifold.com
'98 M3/4 - ECIS CAI, S50 Manifold, Conforti Software, 16" Spal Puller, UUC Pulleys, Fan Delete, UUC Stage 2 Fly w/M5 Clutch, UUC Blacks w/TMEs, X-Brace, GC RTAB shims, GC RSMs,
M Roadster lever, 245x40x17 all 4 corners, Drilled Zimmermans, Motul RBF600 and Redline Synth fluids. My Dyno HERE
My Website: www.m50manifold.com
My Email: info@m50manifold.com
I'm this has prolly been asked, but will I be able to pass a smog test with this conversion?
Bookmarks