Hey there guys,
I have a bone stock 94 325is 2dr. Wondering what size are the biggest rims i can put on it w/o fender issues. I would prefer to not roll my fenders and not use spacers.
Would i be able to fit 18x8.5's et 40, without having any issues stock? What about staggered and non-staggered fitments? Will there be any wheel rub issues? Basically what size width would i be safe with 17's or 18's
Any help is very much appreciated
Thank you ahead of time
18x8.5 et40 all around would be a good combo.
Run 225/40/18 or 235/35/18 and you shouldnt rub
I'm a ROLEX wear'N
Diamond ring wear'N
KISS steal'n
WHEELIN DEAL'N
Limousine RIDE'N
JET PLANE FLY'N , SON OF A GUN!
And I'm havin a hard time holdin these alligators down!!!!!!
WHOOOOOO!!!!!!
Check out this guy here- Wouldnt he have rubbing issues???
http://www.craigslist.org/sby/car/150423980.html
Depends on the offset of the wheels. Plus you can do alot on a stock suspension.Originally Posted by Camoflash
I'm a ROLEX wear'N
Diamond ring wear'N
KISS steal'n
WHEELIN DEAL'N
Limousine RIDE'N
JET PLANE FLY'N , SON OF A GUN!
And I'm havin a hard time holdin these alligators down!!!!!!
WHOOOOOO!!!!!!
Karl,
Thanks for all the help. So i should be able to go 18 x 8.5 if i put some narrow tires on em? with stock suspension and no spacers?
Thanks again
Yes. I ran 18x8.5 on h&R Race with 225/40 up front and 235/40 out back with a et35 with no problems.Originally Posted by Camoflash
You will be fine with that set up. But i ask you to PLEASE lower the 4x4 when you have a chance
I'm a ROLEX wear'N
Diamond ring wear'N
KISS steal'n
WHEELIN DEAL'N
Limousine RIDE'N
JET PLANE FLY'N , SON OF A GUN!
And I'm havin a hard time holdin these alligators down!!!!!!
WHOOOOOO!!!!!!
Bookmarks