I have a run down for you...now I may have mentioned that I have little experience parting these motors out and want to be fair but I am trying to recoupe some of my initial investment...I inspected everything and I am going to list my prices, which I have tried to adjust to make fair...these prices do not include shipping and I will try to be completely fair with any shipping costs and will charge only the actual shipping costs for any parts. I do not necessarily know that my pricing is spot on but I am pretty sure that these prices reflect fair market value as the parts appear to be in good condition with 77k miles.
Complete S50 head with valves cams and the whole 9: 550
Set of cams s50 cams that appear to be in good condition: 225
Rods: 80
Crank: 250
Bare S50 block with minor surface rust and pitting on a couple of the cylinder walls: 300
oil pan: 125
transmission: 350 (2 available with approximate similar milage...clutch equipment will be included but I cannot guarantee that everything is there clutch wise so consider them extras)
all of the top end accessories are available...list what you would like specifically and make an offer or I can give pricing as to a specific part...I basically have two piles of accessories and extras but this should be enough of a listing to get things going.
I cannot guarantee the condition of these parts but I do have a high quality digital camera so if anyone would like pics or if anyone knows of a location where i can host free pics for this purpose, please let me know. I will do everything I can to inspire confidence in my legitimacy of these parts and my desire to get them to people with happy results! If anyone wants to email me, I can be reached at methodryder@yahoo.com and I can be asked for any additional contact information there
Nate Evans
I'm interested in the cams and crankshaft, and I also need the accesory mount bracket from the A/C pump, right side of the engine, as well as the timing chain cover, where the water pump mounts. Mine is corroded. Thanks,
-Tim
I'm going to run out and snap off some pics right now...for anyone who needs them
I forgot to mention...that at any time i would consider selling the entire motor as a complete rebuildable unit with all accessories for $1450
Could you email a couple pics of the rods?
bcart1991 @ aol . com
Thanks.
Carter
KOTTER
I will give you 300.00 for the head without cams or cam trays let me know thanks scott
here's some pics:
<img src="http://i39.photobucket.com/albums/e154/methodryder/m3%20parts/IMG_0449.jpg" alt="Image hosted by Photobucket.com">
<img src="http://i39.photobucket.com/albums/e154/methodryder/m3%20parts/IMG_0450.jpg" alt="Image hosted by Photobucket.com">
<img src="http://i39.photobucket.com/albums/e154/methodryder/m3%20parts/IMG_0452.jpg" alt="Image hosted by Photobucket.com">
<img src="http://i39.photobucket.com/albums/e154/methodryder/m3%20parts/IMG_0453.jpg" alt="Image hosted by Photobucket.com">
<img src="http://i39.photobucket.com/albums/e154/methodryder/m3%20parts/IMG_0454.jpg" alt="Image hosted by Photobucket.com">
<img src="http://i39.photobucket.com/albums/e154/methodryder/m3%20parts/IMG_0455.jpg" alt="Image hosted by Photobucket.com">
<img src="http://i39.photobucket.com/albums/e154/methodryder/m3%20parts/IMG_0457.jpg" alt="Image hosted by Photobucket.com">
<img src="http://i39.photobucket.com/albums/e154/methodryder/m3%20parts/IMG_0458.jpg" alt="Image hosted by Photobucket.com">
<img src="http://i39.photobucket.com/albums/e154/methodryder/m3%20parts/IMG_0459.jpg" alt="Image hosted by Photobucket.com">
<img src="http://i39.photobucket.com/albums/e154/methodryder/m3%20parts/IMG_0461.jpg" alt="Image hosted by Photobucket.com">
<img src="http://i39.photobucket.com/albums/e154/methodryder/m3%20parts/IMG_0462.jpg" alt="Image hosted by Photobucket.com">
<img src="http://i39.photobucket.com/albums/e154/methodryder/m3%20parts/IMG_0463.jpg" alt="Image hosted by Photobucket.com">
<img src="http://i39.photobucket.com/albums/e154/methodryder/m3%20parts/IMG_0465.jpg" alt="Image hosted by Photobucket.com">
I still cant send pm's to people...but there are pics of rods there...and i would take 325 for bare head plus shipping to the gentleman who requested it...there are pics there too
I'll give you $425 shipped for the crankshaft and cams. Let me know
I think we could manage that as well...feel free to email me
<img src="http://i39.photobucket.com/albums/e154/methodryder/m3%20parts/bimmerlogo.jpg" alt="Image hosted by Photobucket.com">
Gotten alot of emails and responses! I am here to help and ready to serve. I am working on a first come, first serve mentality, although if a buyer seems serious, I will earmark parts until the transaction can be completed. So all of you out there who have put in requests can feel free to email me to complete the transactions and/or request my number so we can discuss any details or concerns...I am kinda suprised no one has asked for the block, yet...there is minor pitting and surface rust so it will need a bore or maybe hone job, but it is a very good candidate for rebuild!
Nate
methodryder@yahoo.com
<img src="http://i39.photobucket.com/albums/e154/methodryder/m3%20parts/bimmerlogo.jpg" alt="Image hosted by Photobucket.com">
If you still have the cams, I'm highly interested and have the money in hand.
I hope that you can answer few questions.
How many miles does the cams have?
Can you take some close pics of the cams and send it to poorlilpoop@hotmail.com ? Like I said, I'm highly interested in yoru cams. It would be nice upgrade to my stock 325is.
Thanks.
Allright everyone...I've gotten alot of requests for lose ups of the cams...I'll head out to the shop, in a few, and get some pics of the cams for everyone...thanks!
<img src="http://i39.photobucket.com/albums/e154/methodryder/m3%20parts/bimmerlogo.jpg" alt="Image hosted by Photobucket.com">
do you happen to have a high pressure power steering line?
Any more info on the tranny? Is it a ZF 5 speed (M3)? Would you crate and ship?
I think I specifically remember seeing that...I'll check tomorrowOriginally Posted by nickmpower
<img src="http://i39.photobucket.com/albums/e154/methodryder/m3%20parts/bimmerlogo.jpg" alt="Image hosted by Photobucket.com">
I dont know what the ZF designation stands for but both of the trannys are 5 speed manuals pulled from 1995 BMW M3's...I hope that helpsOriginally Posted by mcclaskz
<img src="http://i39.photobucket.com/albums/e154/methodryder/m3%20parts/bimmerlogo.jpg" alt="Image hosted by Photobucket.com">
I want to apologize to everyone waiting on close up pics of the cams, I wasnt able to make it to the garage today, something came up that I couldnt avoid, but I will get to them tomorrow. SORRY!
<img src="http://i39.photobucket.com/albums/e154/methodryder/m3%20parts/bimmerlogo.jpg" alt="Image hosted by Photobucket.com">
I need that crank if it's still available.-Mike Longwell-kx361@msn.com
correction kx361@msn.com
I've had a lot of reponses for the majority of the parts, but no one has finalized anything yet...Again...if anyone would like anything, need anything, please feel free to email me, i'll give you my number...also, for anyone interested in knowing, my paypal is verified and I am an ebay seller...If things dont start moving here I'll be listing the parts on Ebay shortly.
Nate
<img src="http://i39.photobucket.com/albums/e154/methodryder/m3%20parts/bimmerlogo.jpg" alt="Image hosted by Photobucket.com">
I too am interested in the cams. Please send pics to calves2997@yahoo.com
Also send me your payapl address, so I can make payment on the ASAP.
I'm heading over to the garage as we speak...I'll be back shortly with some more pics!
<img src="http://i39.photobucket.com/albums/e154/methodryder/m3%20parts/bimmerlogo.jpg" alt="Image hosted by Photobucket.com">
Here are a couple of cam close up pics I snapped today and a couple of other pics I snapped of some other stuff:
<img src="http://i39.photobucket.com/albums/e154/methodryder/m3%20parts/IMG_0467.jpg" alt="Image hosted by Photobucket.com">
<img src="http://i39.photobucket.com/albums/e154/methodryder/m3%20parts/IMG_0472.jpg" alt="Image hosted by Photobucket.com">
<img src="http://i39.photobucket.com/albums/e154/methodryder/m3%20parts/IMG_0474.jpg" alt="Image hosted by Photobucket.com">
<img src="http://i39.photobucket.com/albums/e154/methodryder/m3%20parts/IMG_0476.jpg" alt="Image hosted by Photobucket.com">
<img src="http://i39.photobucket.com/albums/e154/methodryder/m3%20parts/IMG_0475.jpg" alt="Image hosted by Photobucket.com">
<img src="http://i39.photobucket.com/albums/e154/methodryder/m3%20parts/IMG_0466.jpg" alt="Image hosted by Photobucket.com">
<img src="http://i39.photobucket.com/albums/e154/methodryder/m3%20parts/bimmerlogo.jpg" alt="Image hosted by Photobucket.com">
Im also calculating shipping costs right now, so If you are someone who has requested shipping quotes via email or on the phone, please feel free to check your email for a response as I will have them calculated here shortly...thanks everyone for your patience and your requests! It has been a pleasure joining this community! And once again...my paypal is verified and I have never recieved a complaint or negative mark in 5 years of history! I just wanted to give everyone here a chance to buy now before I list on ebay.
Nate
<img src="http://i39.photobucket.com/albums/e154/methodryder/m3%20parts/bimmerlogo.jpg" alt="Image hosted by Photobucket.com">
Bookmarks