I need a 32mm for the fan clutch. I put on an eletric fan on my car but the guys at RRT told me it's not cooling my engine down enough. So they told me to put the stock fan back in. Anyone have one I can borrow? Thanks.
Selling my E500 Olympus $350(OBO), let me know if you're interested!
Anyone have a crank pulley tool for an m50 in Philly area?
I need to take off the Vanos spline from my stock intake cam and put it back onto the s50 cam - someone showed me a nice procedure to use without using an impact gun or putting the cam in a vice. Need the crank pulley tool to bolt it to the cam though.
TIA
Thought I would just update this thread.
I have:
Lift, air tools, spring compressors, RTAB tools, Engine tools for S50/M50, and a new addition, a BMW GT1 diagnostic system. Extensive knowledge of E36 M3's
None of it for loan, but you can use them for a small fee.
No matter where you go, there you are...
I have all the drifts necessary to change out the shift pins in a 5spd if anyone needs them.
2002 Alpine White w/ Black 368 (<OO \(||][||)/ OO>)
Power: Custom Exhaust w/ High Flow cats, CSL headers, built, low-compression Supercharged and aftercooled S-54, ViPEC standalone ECU, Vortech V2 Si trim
Driveline: Euro 6 speed, 3.64 diff w/ 40% Lockup, Rogue Octane SSK, UUC Red TME kit, UUC Stage 3 LTW Flywheel/M5 Clutch, SS Shift Knob
Suspension & Brakes: TC Kline True Match Coilovers 500f/500r w/ adjustable camber plates, Racing Dynamics sways, Custom front sway endlinks, ATE fluid, UUC/Willwood BBK 6 piston f - 4 piston r , Slotted E46M3 Rotors, Stainless Lines, Strong Strut, IE Subframe & adjustable rear trailing arm bushings
ICE & Misc: Projector Z's w/DDE & 5k HID, 19'' Gold HRE C20's, Custom Aux pwr outlet, footwell lighting, ACS Splitters, Areo Sideskirts, Custom gauge pods, Z8 Start, Pioneer AVIC Z3, Clarus Components, 10" RE Sub in a Mister-X Enclosure, Alpine PDX 4X150 + 1X600 Amps
Coming soon: and a visit to Randy Forbes
Looking for a fender roller in/near NOVA
I am going to need Cam holding blocks and the engine TDC lock pin. Installing Dr. Vanos Stg1 and a headgasket job.
in need of fan removal tool, already have a 32mm wrench but broke 2 long flatheads trying to do without the tool and already rented a kit from advanced that didnt work
help anyone?
im in woodbridge 22193
86 Rx-7 GXL(sold)
98 Eclipse(sold)
97 328is(gone)
06 Mustang GT(gone)
12 Mustang GT
LETS GO RANGERS!
Which way are you turning the wrench?
clock wise, I know the threads are reversed but the WP pulley keeps spinnin and I have nothing to hold it with : /
86 Rx-7 GXL(sold)
98 Eclipse(sold)
97 328is(gone)
06 Mustang GT(gone)
12 Mustang GT
LETS GO RANGERS!
If you want to drive I've got one.
Eldersburg, Md
No matter where you go, there you are...
thats far man : /, ill go bug this shop I know see if they got one thanks anyways
86 Rx-7 GXL(sold)
98 Eclipse(sold)
97 328is(gone)
06 Mustang GT(gone)
12 Mustang GT
LETS GO RANGERS!
I have the b90 rear wheel bearing tool just FYI
Anyone in MD have a 30mm thin deep well socket for removing the tranny output flange?
all kinds of sockets
jack stands
air tools
ac line connector removers..
inverted torx set(10-18).for cyclinder heads
I need the fan removal tool but am not capable of driving my car as it is down for the supercharger install.
Anyone help a brother out?
Where are you in Md?
No matter where you go, there you are...
^belair i think?
yes bel air, but rpm620 and i are heading up in an hour or so with the tool and some helping hands.
Anyone here have a RTAB puller? I am going to be doing a complete suspension over haul on my car and all bushing MUST GO! I live in Oakton now.
Selling my E500 Olympus $350(OBO), let me know if you're interested!
Also looking for a RTAB tool to do front bushing replacement. Located down in Hampton Roads though.
'Sweetness Tres' M44, 1.9L Z3 5-Speed Roadster '97 Boston Green 66K Smiles Mine
'Sweetness Too' M52, 2.5L Z3 5-Speed Roadster, '00 Jet Black 165K Smiles 2022 Gone Ins Co Total in Jan 2022- Right Front Collision - Paid $8850 !!
'Ol' Black Betty' S52, 3.2L ///M3 5-Speed Vert '98 Cosmos Black 265K Smiles Wifeys
M50, 2.5L 525i E34 Tragi-matic '95 Sedan Alpine White III 238K Smiles Was Daughters Mine Again
'Gretchen' M30, 3.5L 535i E34 Tragi-matic '90 Sedan Glacier Blue/Indigo 144K Smiles 2018 Gone & I miss her
'Sweetness' M44, 1.9L Z3 5-Speed Roadster '96 Boston Green 264K Smiles Was Mine Ins Co Total in Jan 2013- Rear End Collision - Paid $4800 !!
Anyone has a ball joint puller that works on E39 540i? I have to replace thrust arms. Need it asap since I need to get the car inspected. Anyone got one to lend or can help with the install?
Lazy Saturday drive in my E34: https://www.youtube.com/watch?v=TnzvZgPnOos
Bookmarks