I would like to swap my auto M3 to manual and I need all the parts. This includes tranny, drivetrain, pedal assembly, clutch, flywheel....
I am ready to buy, let me know the specs and how much.
My car is a 1995 M3 but from what I understand 96-99 set ups will work too
I have a 95 M3 tranny, flywheel, starter, shift lever, and shift carrier. Let me know if you are interested.
i have a complete pedal assembly. $225 shipped w/ clutch master cylinder.
I have everything
ltw flywheel
Clutch
slave/mater cyclinders
hydroloic lines
complete pedal box
complete Shifter assembly
guibo
driveshaft
all braces
Email/pm if interested
everything is located in nj and could ship or you could pickup
and a 97 m3 trans with 62k on it
Bill offered me his parts at $1,500. I don't think thats very unreasonable, but I'm looking for something closer to $1,000. Once again, I am looking for the entire thing, not just some of the necessary parts. Thank you for your posts
I would do $750 plus shipping for the tranny/flywheel and misc parts.
cheades- do you have everything or just some parts?
I just have tranny, flywheel, starter, shift rod, and shift carrier. Combine with acxe36m3's pedal cluster and you have a complete setup minus the slave cylinder and hydraulic lines.
Bookmarks