PRICES LOWERED!!!
car is located in San Gabriel, SoCAL
YES!!! I KNOW ITS DIRTY.. EVERYTHING WILL BE CLEANED BEFORE ITS SHIPPED.
NO DOOR PANELS OR PILLARS OR SEALS My PC motherboard just died so I will have little access to the net for the next couple of days. Local buyers please call me at 626 926 9914.
ARTIC SILVER SEDAN /w FULL BLACK INTERIOR.
Exterior:
Please send me your item request via email to vmscrapz@hotmail.com. PMs are too hard to keep track of and I will NOT check through the thread.
* Hartge Design A 16x7.5 /w Bridgestone Potenzas 225/50zr16($500 NEW) /w 150miles $500
* OEM M3 bumper + all moldings - tow hook molding, easy 2in fixable crack on left side $200
* Bavauto M3 rear diffuser $125 or Full bumper /w diffuser $200
* M3 Mouldings /w most clips (basically new but mounted for a day) $150
* M3 Mirrors - driver sided glass is not original $150
* Stock Trunk Lid $100
* 4 Stock Doors $100 each.
Last edited by scrapz; 07-13-2005 at 08:21 PM.
Engine:
* 6 Beru e36 Ignition Coils 4.5k miles $150
* 403 DME ECU /w Bavauto Performance chip $200
PERFECT FOR 92 325i /w CAI & Exhaust
* OBD1 M50 MAF
* OBD1 M50 Intake Manifold $140
* OBD1 M50 Throttle Body $40
* NEW M3/3xx Radiator $140
* OEM Graf Metal Waterpump (2 miles) $25
* OEM Thermostat (2 miles) $25
* E36 Aluminum Thermostat Housing $20
* Head Gasket Set, 325i/is/iC (thru 08/92) $90
* Cylinder Head Bolt Set, 325i/is/iC (1992-95), 328i/is/iC (1996-99) $15
Interior:
* BLACK Dash w/o center vents no warping $150
* Rear Seats in good condition $150
* Center console /w armrest good condition $185
Brakes:
* Zimmerman X-drilled rotors + AXXIS ultimates brake pads $250
* SS Brake lines DOT Legal *NEW 6 total* (bought from bmwg84) $75
Audio:
* Second Skin Audio Damplifier 50sq ft. $140 + half shipping
* Stock Moldings $10 each or $45 for all
* Viewsonic VX910 19" Flat Panel Black/silver ( 2 weeks of use )
PRICE DROP to $300 for quick sale ( steal $360 shipped online)
http://viewsonic.com/products/deskto...x910/index.htm
Last edited by scrapz; 07-14-2005 at 05:00 AM.
I'm interested in the front + rear bumpers plus the m3 mirrors. Can you PM me a price shipped to 38018 (Memphis, TN)?
Also are the mirrors oem?
SOLD -A dozen ///M3s of all shapes
If the mirrors are powered, and Fritzintn doesn't take them, I am interested.
What about the headlights? dibs if price is right.
Thanks
happen to have a rear window seal? i need the rubber/plastic pcs that line the entire outter perimeter of the window/windshield.
Mike - Owner/Devotee
Second on Head lights if first passes...
rear diffuser for non m bumpers?
Also is oBC avaibable. 18 or 11?
Kidney grills?
I need the driverside door handle, cam. pos sensor, and front bumper support
also need fan clutch pulley, and stock tails
Prices on the following please:
Gas Lid, Valve Cover (non vanos), Rear Ashtray, Rear-Right Side Window Motor, Front Passenger Window Regulator, Hockey Pucks (2).
Thanks!
definitely intrested in the m3 front bumper
do u have paypal?
-Sam
328i... back to n/a
email me bump
asdsa
I need one O'Sh_t handle if black with screws, Also I need the clips that cover the shoulder harness attacment point.
Thanks
Hey bro, I need front door panels (if they're black)
Willing to drive and pickup with cash
Let me know
Thanks
Could you post pictures of the dash? If all checks out I got dibbs.. You take paypal? How about shipping to CA 94945.. Do you have any other interior parts for sale that you did not post above?
Thanks,
Sean Behm
-Custom Widebody 332i-
-Custom HRE wheels-
-Focal Audio:-
Alpine PXA-H701+C701-
-(2)Focal 33KX-
-(2)Focal KP165 K3P Kits-
-(2)Focal FP 1.800 Amps-
-(2)Focal FP 2.150 Amps-
-(3)Xenarc 7"TSV Touch LCD’s-
-PROJECT DETAILS-
replied
.Originally Posted by AngelEye328i
how much to ship the trunklid to 17356?
email me.Originally Posted by essejM3
DO you have the engine for this car?
Bookmarks