Garrett T4 Turbo for 2.5-2.8L (m50/m52/m20) NEW

[caldweb]

I was planning on using this turbo for my s50 turbo project, but its just a little too small for what I'm shooting for. Its a T04e 57 trim compressor side with a .58 A/R p-trim turbine side. This turbo is a great size for making 400hp+ with 2.5l to 2.8l engine, and will have great spool up with the .58 turbine housing. I bought this turbo from EMC here on bf.c. He had originally picked it out for his m50 turbo project. The turbine housing is ceramic coated to prevent thermal energy losses and keep underhood temperatures down. This will also keep it looking good for a long time and won't rust. It has an on-center turbine housing, which is what's needed to work with Cartech's exhaust manifold for the m50/s50. It will also work with any other t4 flanged manifold.

Price: $600 shipped within the US. This turbo costs $700+ new WITHOUT the thermal coating or shipping.

Here's the complete specs:

Compressor: T04e .60 a/r cover with 57 trim wheel
3" inlet, 2" outlet.
Oil cooled center cartridge
Turbine: .58 a/r on-center T04 inlet flange, 3" 4 bolt outlet
P-trim turbine wheel
Will flow 49lbs/min.

[hwl328is]

what else is needed for me to get a full turbo kit?
im just wondering i need a price range of how much everythign would cost as im very interested in turbocharging my car

[caldweb]

what else is needed for me to get a full turbo kit?
im just wondering i need a price range of how much everythign would cost as im very interested in turbocharging my car

This is only the one out of many parts. Turbo manifold, intercooler/piping, injectors, wastegate and some kind of engine management just to name the big items. There's tons of information in the FI forum. Check out the posts of people wondering how much it costs. That should be a good starting point. Good luck.

[toyosupr]

Nice

[caldweb]

This is sold!