Results 1 to 2 of 2

Thread: IAT Temperature Readings

  1. #1
    Join Date
    Apr 2002
    Location
    San Luis Obispo or Grass
    Posts
    326
    My Cars
    '98 M3/4, '90 325i

    IAT Temperature Readings

    After installing my M50 manifold, I hooked the IAT sensor into the bottom right side of the manifold when looking at it from the drivers side of the car. I hooked up my laptop to the OBDII port and was getting 115 degree intake temps when the outside temp was only 68 degrees.

    This is not normal, is it?

  2. #2
    Join Date
    Apr 2002
    Location
    San Luis Obispo or Grass
    Posts
    326
    My Cars
    '98 M3/4, '90 325i
    Quote Originally Posted by E30Alex
    After installing my M50 manifold, I hooked the IAT sensor into the bottom right side of the manifold when looking at it from the drivers side of the car. I hooked up my laptop to the OBDII port and was getting 115 degree intake temps when the outside temp was only 68 degrees.

    This is not normal, is it?

    N/M, I just talked to vjlax18 and he said there was an OBD-1 sensor and an OBD-II sensor. I was using the wrong one

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •