Results 1 to 10 of 10

Thread: Edge MotorWorks A+++++++ I can't say enough!!

  1. #1
    Join Date
    Jan 2003
    Location
    Coeur d' Alene, Id
    Posts
    1,129
    My Cars
    95 525i 3.2L-- AC Schnitzer S5 project

    Talking Edge MotorWorks A+++++++ I can't say enough!!

    Well I just can home from an all day affair at Edge MotorWorks http://www.edgemotorworks.com/

    Most of you know I went there with a boat load of things to be done. Gordan who I talked to previous to going there set it up. I arrived at 8:30am Friday and left there at 9:00pm. friday night. The job was to drop the rear sub-frame and replace every bushing in it and add a few things along the way. The dropping of the sub-frame was easy but let me tell you all the bushing were another story. It must have took at least 1 hr per bushing and there were 7 of them to get them out. One would come out and the next was not budging. But all was managed to be done. I can not say enough about this group of guys (well execpt Eric he just kinda walk around asking for updates ) but Gordan, Rich and Jim busted their A$$es and even let me get dirty along the way. It was a long day but even when finished and the clock was nearing 9 pm Gordan and Jim persisted and even doubled check every nut and bolt to make sure they were torqued to spec. Took the car for a drive and checked everything again.

    The result are amazing.....the car is on rails and I still have to put the Koni's on.

    But for me....meeting and making new friend with these guys was the best experience I have had in a long time. The atmosphere around the shop was like working in your own garage.

    If only all the supporting vendor put as much effort as Edge.........does into there sport it would be amazing!!!

    Edge I can not say enough.....Thanks a MILLION! I'll be back in a few for the engine swap.


    thanks

    theDogger
    Last edited by theDogger; 04-09-2005 at 01:06 PM.
    <img src="http://bigfootdesigns.com/bimmer_forum/main.jpg" width="375" height="167">
    | 98 ZF320 5-Speed Tranny | UUC Clutch | UUC Flywheel | UUC EVO 3 | UUC DSSR |
    | UUC Tranny Mounts | JC Chip | ECIS CA | Koni Adj. Struts & Shocks | Grunt Bushings |
    | Eibach Prokit | AC Schnitzer Sways | AC Schnitzer Type III 18x8.5 | Full AC Schnitzer S5 Body Kit |
    | Nitto 555 245/40x18 | Hella Schwatz Euro H1 Headlighs |Hella Smoked Tail Lights|
    | Remus Exhaust from Headers | Alpine 7998 | 2-Kicker L712 Sub | Kicker RS 6.5 | Kicker RS 5.25 |
    | Kicker RMB 6.75 | Kicker KX 650.4 | Kicker KX 600.1 | Kicker SX 400.2|Kicker KQ 30 EQ |
    | Stinger Expert Cap | Stinger Expert Accessories | Clifford G5 | 99 s52 Turbo eta – 02/06 |

  2. #2
    Join Date
    May 2004
    Location
    North Bay Area
    Posts
    3,456
    My Cars
    1995 S/C 540i/6spd 4.4L...1990 535i/5spd
    Congrat's Brian all the new suspension.Edge is the best indeed.Can't wait to get a ride in your AC Scnitzer big go-kart.

  3. #3
    Join Date
    Apr 2002
    Location
    Bay Area, CA
    Posts
    10,260
    My Cars
    E90, E34 (retired)
    the boys at edge are awesome!

  4. #4
    Join Date
    May 2003
    Location
    bay area,ca
    Posts
    72
    My Cars
    03 330ci silver
    I havent heard a single bad thing from edge yet. They're great guys. Everyone seem to love their work.
    Mods = Too many to list.
    shop EAS Local San Francisco, CA and Bay Area. Become a Fan of my paint work on Facebook.

  5. #5
    Join Date
    May 2004
    Location
    North Bay Area
    Posts
    3,456
    My Cars
    1995 S/C 540i/6spd 4.4L...1990 535i/5spd
    Quote Originally Posted by monkeyjuice5051
    I havent heard a single bad thing from edge yet. They're great guys. Everyone seem to love their work.
    Their are like your favorite cousin.

  6. #6
    Join Date
    Feb 2003
    Location
    Bay Area, CA
    Posts
    828
    My Cars
    mostly BMWs
    The guys at Edge rock! Nothing beats having your car(s) worked on by a fellow enthusiast. The entire shop has a team like feel to it, making the customer feel like another team member.

  7. #7
    Join Date
    Apr 2001
    Location
    Dublin, CA
    Posts
    4,558
    My Cars
    '95 BMW M3-V8, '04 Ram D
    Thanks for the props man, glad you are enjoying your car! BTW...If I remember correctly, I installed a complete Z3 suspension while the rest of the boys were on your car. And I did it on the wet ground....See you soon!

  8. #8
    Join Date
    Jan 2003
    Location
    Coeur d' Alene, Id
    Posts
    1,129
    My Cars
    95 525i 3.2L-- AC Schnitzer S5 project

    Talking

    AH...Eric just had to give you some SH#!.....Yes you did swap the entire suspension on the Z3.


    theDogger
    <img src="http://bigfootdesigns.com/bimmer_forum/main.jpg" width="375" height="167">
    | 98 ZF320 5-Speed Tranny | UUC Clutch | UUC Flywheel | UUC EVO 3 | UUC DSSR |
    | UUC Tranny Mounts | JC Chip | ECIS CA | Koni Adj. Struts & Shocks | Grunt Bushings |
    | Eibach Prokit | AC Schnitzer Sways | AC Schnitzer Type III 18x8.5 | Full AC Schnitzer S5 Body Kit |
    | Nitto 555 245/40x18 | Hella Schwatz Euro H1 Headlighs |Hella Smoked Tail Lights|
    | Remus Exhaust from Headers | Alpine 7998 | 2-Kicker L712 Sub | Kicker RS 6.5 | Kicker RS 5.25 |
    | Kicker RMB 6.75 | Kicker KX 650.4 | Kicker KX 600.1 | Kicker SX 400.2|Kicker KQ 30 EQ |
    | Stinger Expert Cap | Stinger Expert Accessories | Clifford G5 | 99 s52 Turbo eta – 02/06 |

  9. #9
    Join Date
    Dec 2002
    Location
    San Jose, CA / Davis, CA
    Posts
    4,127
    My Cars
    '01 M5,'95 325is,'82 320
    Booyah

  10. #10
    Join Date
    Jun 2003
    Location
    california
    Posts
    105
    My Cars
    e30 m3
    Yeah, the guys at Edge are a great bunch of guys. I brought my car for an Inspection 2. Came out with a UUC SSK as well. Overall, great service with great prices.

    Dave

    1988 E30 M3
    My Webpage

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •