how to achieve badness like this e36???
1) are those 19" rims?
2) did he cut his springs?if he did cut his springs, what kind of springs did he use, and how many coils? hahahahahaha
they look like 19"s
dunno about the springs. (I hope he didn't cut them)
Is that an AVR front on that thing?
blubimmer.... do you know how to achieve such lowness w/ springs-out-of-the-box? cuz i don't even think h&r m3 race sprigns are this low,,,, do you think he has fully-threaded shocks?????????
since i have nothing better to do....why dont i just tell u what he has:
95 bmw m3
-dressman bodykit
-carbon fiber splitter
-CF hood w/scoops
-CF side mirrors
-CF headlight brows
-euro clears
-M sport wing by APR
-RMS supercharger
-motor swap with 2000 ///m3 3.2L engine
-rms chip
-NOS (rat bastard!) - 100 shot
-NOS boost controller, and purge valves
-genie headers
-dinan throttle boddy
-custom intake
-remus exhaust
-H&R adjustable coilovers
-bilstein struts
-sparco strut tower brace
-rd sport sways
-centerforce clutch
-B&M short shifter
-HP racing 8 piston calipers
-HP racing 15.0" rotors
-Stainless braided lines
-235/35/19 yoko avs sports
-19x8" hartge classics
-diamond audio 10 speaker system with 2 15's in rear deck
-esoteric amps
-eclipse head unit
-sparco alcantara red suede inserts
-sparco CF foot pedals
-sparco steering wheels
-ichibahn shift knob
-CF interior kit
-autometer CF gauges/pod
-sparco torino racing seats
-ignited push button ignition
-HIDs by gourmet garage
-compuster (on board computer)
and last but not least:
-a hot ass girlfriend who sat and was cleaning the wheels with a rag and hand buffing the car wherever it was "dirty" the entire day....DAYAM :
seedster ><<><><><><... thx!!!!!! helping me was the most important thing you could have done at the moment! urgh,,, i guess he could afford all that shit, might as well throw in $1000 suspension package too. mmmmmm,,, can i make grooves into my bilstein sports to make them threaded shocks??? i wanna go lower,,,, i want to have the most slammed invisible e36!!
invisible eh?.....i see where ur going with this one...i thought we already established u dont drive an e36 :o LOLOriginally posted by pikachu
i wanna go lower,,,, i want to have the most slammed invisible e36!!
Just get those H&R Invisi-coils. You pay for them with invisible money and they will sit the body of any invisible e36 right on the ground. I doesn't get any lower than that.Originally posted by pikachu
i want to have the most slammed invisible e36!!
whats is this all about.....I've seen Pika's car befor......
uhh, saeed, you must have been bored!!!!
RENNtech 168mm Pulley and Tune | VRP Carbon Fiber Airbox | JP Shorty Headers | Eisenmann Race Exhaust | RENNtech Digital Lowering Module | 19" HRE 547R
459 RWHP, 522 RWT
Hey Pika,
If you wanna be slammed do airbags. I may do this jes cuz its ride adjustable and i will scrape the shit out of my car. Still deciding, i need to see how low the kit is when i get it.
JOEY | '18 M3 ZCP AW | '18 Lead Foot Raptor
Pika, would this work for you.........
http://www.ground-control.com/gcbmwcat.htm
Or ask Jimmy540i if has anything for you..........:p
The man with that car is officially a pimp. 'Nuf said.
The only thing I'd loose on it (if it was my choice) would be that hood. Needless money when those scoops are just for show, but when you've got a 2000 M engine in your car, you do whatever the hell you please:
hey chris.....'mind you its a 2000 m3 engine......not the 2001 (new m3) engine....if he had that....damn...if he....umm.....had......god im going crazy just thinking about it!!!!!
Right, right. i was just saying he's got some serious funds to slap a brand new motor in there along with all those mods. $Cha-ching$
Ohhh, I just saw it's 3.2L too!! Even better AND more dough
Seed, would you know if he works for/owns a tuning company of some sorts?
dont think so....from the looks of it....it just seemed as though he had money coming out the wazoo...i hope he doesn't read this but it didn't seem like he knew much about the stuff done to his car either (aka just slapped down a wad of cash and told em "make my car badass") :
Actually Saeed, I believe he works for Meguiar's and that is why he could not accept the award for 3rd place in the show. The car is very bad-ass but I would definitely lose the wing and the front bumper. It was sagging pretty badly.
As for your last comment when you typed up his page long description, yes, she was damn hot
For reference about Saeed's and my comment:
YEEEEEEEEEHAAAAAAA!
Total Hottie.
15" Rotors! Holy S***! that thing can stop a Amtrak freakin' train!
he's got some awesome setups.... i jus' wished i was able to have gone to bimmerfest. wow....
Richard
WOOHOO! nice thinkin VShah!!! that's definitly her. and as for my comment on the guy probably not knowing too much about the car...it isn't completely unjustified....i tried to ask him a simple question about his NOS. i told them that i've heard that you can only install NOS on 95 and early e36 engines (both ///M and non-///M) since they're more durable (made of cast steel i think). while the 96+ engines are made of aluminum....NOSing an aluminum block would most likely melt the sucker in an instant. i asked him how he got his NOS on the 2000 (aluminum block) motor.....he said something to the sort of "umm, yeah...i put NOS on it. you might wanna talk to NOS about that though."
now, something that i just thought about was...i heard on some other forum/board that from the looks of the engine it was only an S50 (thats the 95 m3 motor right?) and that he was bullshitting that he threw a 2000 ///m motor in there....which would only solidify my theory since nos can only be put on the 95 m3 engines. ..................or maybe im just smoking some good shit! :p
seedster,,, why didnt you ask the gurl about the NOS installation????? hohohoho,,,,, maybe she would know???
Last edited by pikachu; 04-24-2001 at 11:09 PM.
ho boy:"umm, yeah...i put NOS on it. you might wanna talk to NOS about that though."
hey saeed... didn't u say earlier, or someone at least that its better to NOS a car that's a 325 instead of a 328, because the 325 were made of steel and the 328s were made of aluminum block...?
jus' trying to make sure...
Richard
i hope to god ur joking.....if u are....i didnt catch the sarcasm....if ur not......ehh....read upOriginally posted by Black Majik
hey saeed... didn't u say earlier, or someone at least that its better to NOS a car that's a 325 instead of a 328, because the 325 were made of steel and the 328s were made of aluminum block...?
jus' trying to make sure...
Bookmarks