FS: E36 Turbo Parts

[ADVANT123]

Decided to take another FI route, so my turbo manifold and turbo are for sale:

Turbo Manifold: Turbonetics T3 manifold w/38 mm wastegate provision and thermal coated. Brand new, never been used.

Price: $700 shipped





Turbo: T3/T4 60-1 w/.82 AR and stage III wheel. Also brand new.
Price: $510 shipped



These prices are firm and there is no budging on price unless you purchase both items together.

Any questions, let me know.

Joe

[fast4d]

what kind of power will the turbo support?

[ADVANT123]

I would say 450whp efficiently. ShawnsM, a member on this board recently dynoed over 500whp and close to 600 tq. with this turbo.

[aceves]

What would the cost of these be if purchased new ?
I'm just trying to get an Idea of savings.

Also, would I be able to use a GT35R with this manifold ?

Thanks.

[ADVANT123]

The cheapest you will find the Turbonetics manifold for brand new is $620 ish or so. But the turbonetics manifold does not come with an external wastegate port like mine, nor is it thermal coated like mine. Thermal coating usually costs around $100 and to to tap the manifold would probably cost another $100 according to the person I bought it from. So thats 820 without any of the shipping costs associated. Your saving well over $250 dollars here, this manifold is very heavy and expensive to ship. It can handle a GT35R, as it is a T3 based manifold.

The turbo can be purchased from www.cheapturbos.com for $695+ shipping. so about $710 dollars shipped. So once again, your saving another $200 or so bucks. Hence the reason I'm not budging on the price of these parts.

[Mpty3]

Hey Joe...IM me when you get the chance.

[ADVANT123]

Whats your screen name?

[ADVANT123]

Sale pending, thanks guys!

[M3TurboCa]

Advant123 I think Shawn used a smaller turbo than what you are selling.

I think you mentioned that your inlet turbo is 4.0" and the turbo Shwan is using is a T40E a 3.0" inlet if Im not mistaken.

Yours will flow more power on top

Good luck with your sale the price is definately good.

[jetpilot18]

what is the clearence like though for the wastegate being mounted there?

[ADVANT123]

Yes, my turbo is larger than Shawns and will flow slightly more. The parts are pretty much sold, just waiting on delivery of money. You cannot mount the wastegate to the manifold, you must run a tube from the manifold to a lower spot in the engine bay so you have room for the wastegate, just like AA does it. Looking to get the Technique Tuning kit, although I'm not ruling Boost Logic's kit as it looks promising.

[Scho]

Is the turbo still for sale?

[ADVANT123]

Both the manifold and turbo are pending sale as we speak. I'll update the thread if the deal falls thru.

[ADVANT123]

Sale has been finalized, thanks everyone for their offers and sorry to those that werent quick enough!