Ok, so I was installing the DDE enhanced today and I found out that the city lights don't have any charge, so the DDEs wouldnt' work, what I did was connect the wires coming from the DDEs to the low beams and they work that way, but I would like to connect them to the parking lights.
Have anyone done this, or anyone has any idea why the city light output wouldn't have charge.
Thanks
R.I.P. Louie: TehPandaShow gone but not forgotten
then splice into the parking light wire.Originally Posted by The-Great-328ic
97 M3/4
Its grey on each side and has a yellow or purple stripe on it (different color for each side). Don't forget to upgrade your fuses.
-Tyler
Thanks tyler, well I was checking the wires that go to the corner lights, and there are 3 wires, which two should I use? I know one should be for the signals.Originally Posted by BimmerDude18
Also what fuses should I use?
R.I.P. Louie: TehPandaShow gone but not forgotten
I run mne of the parking lights, that way I can have rings and no head lights...
well which two out of the three wires did you used?
R.I.P. Louie: TehPandaShow gone but not forgotten
Ok, the way my lights are (DEPO's with preinstalled DDE's) I just had to tap the hot wire of the parking lights for my 'city' light connection. The DDE's were grounded through the headlight ground and thus only required the single wire to be tapped. The wire of the 3 on each side is gray and will have a stripe on it. One side of the car has a yellow stripe the other side a purple stripe. Thats what I was talking about before. Guess I should have clarified it.
-Tyler
Thanks man, I get it now, I will just keep the ground wire where it's at right now, and just connect the red wire to the parking light, I will do that first thing tomorrow morning.
Thanks again
R.I.P. Louie: TehPandaShow gone but not forgotten
Bookmarks