Hi guys, I need advice on a good drag/street tire for my OE "bottlecaps" wheels, now they have 205/60/15 and i was thinking 225/45/15 drag? I have m52 cammed turbo 12psi and all the rest, went to the local 1/8 mile drag strip last night and did a 2.5 60ft, 9.4 1/8, 86mph. spinning almost all the way, I had my 19s on and all but it was just for fun so i didnt switch back to the 15" OEs. Now I have a bug to lower the 60ft time! thanks for reading
Last edited by nitrosobmw; 05-15-2010 at 12:57 PM.
The good news is you should not have trouble improving your short times!
.-=[ Kenny ]=-. See the BFc Drag Racing Standings List for BMW street cars. Watch my drag racing movies on YouTube. Some info on
BMW turbo street car Drag Racing 101
after some research I decided going with Mickey Thompsom ET street 2, 225/50/15 and I dont regret it, I went to the track again last night and did a 8.0 on the 1/8 @ 87mph and 1.79 60'. my friends say that i should do a 7.6 if I get my lounching straight, anyone using MT et street?
i used to use the mickey thompson et streets at the track but they are natorious for wheels hop and axles breakage. I run mickey et streets 265/40/18 for street use and i use my hoosier quick time pros 26" slicks for the track to save my axles and drivetrain. Your lucky you didnt break anything.lol
1005whp/831wtq little bit of low boost pump gas magic...
Thanks jfdmas! I was worried of breaking something, thank God I didnt, Ill look into the hossiers quick time pros for the track,
MT drag radials are a good choice. I have both ET streets and Drag radials for the Chevelle. I feel the radials are better or at least are more stable with my 2 tons of fun. No sidewall walk down track.
Bookmarks