Please read below what BMW tech doagnosed and advise if anyone had same issue with their BMW 750i (2016)

Components checked : air suspension compressor, solenoid, air lines, suspension bags, control module and all these are working.

Diagnose customer concern Verified air suspension is stuck all the way down. I scanned and found faults for ride height implausible signal and transport mode active. I attempted to command on the compressor and fill front and rear axles but no noise was heard. I then lifted vehicle and accessed the compressor and checked power and ground while activating compressor with scan tool. I found ground was OK but no power was being sent to compressor. I then accessed the control relay for compressor and tested that. I found no power going to relay but relay was activating correctly. This tells me the module is function OK when commanding compressor on but since there is no power to relay it will not activate compressor. I then checked the 510 fuse on the power distribution box. I found no power present on the 510 fuse. This fuse is built into the power distribution box and will need the complete box replaced. **I attempted to try and figure out why the fuse blown but both the old and new compressor operate when applying power so this is hard to say if something happened during testing that blew the fuse or if that was the original concern. I then power the compressor while commanded scan tool to fill struts. The struts still did not fill which tells me there is most likely still a issue but will need to fix this power distribution box issue first so I can continue testing. **