WTB - any of the side rubber gaskets (even if its bad/worn)

[kezug]

I am looking for pieces of #7 and #8 for the passenger side. The ones I have are fine but just do NOT butt up against the other pieces and that causes a slight gap. I am just looking to fill in that gap and if lucky, source something that doesn't work as a full piece and is laying around unused .

So, if you have #7 and or #8 for passenger side, even if worn/torn, I am interested.

[COLOR=rgba(0, 0, 0, 0.87)][/COLOR]

[BimmerBreaker]

A trick from back in the day was to cut the seal open, insert some rubber tubing and then re-seal it with black silicone. The rubber tubing pushes outwards from inside the collapsed seal, thus allowing it to actually seal again.

[Vinci]

Another trick for these is to shim out the metal mounts for the seal. I can't speak for all of them, but mine had several shims installed from the factory.