Take it! To the limit 1MT
E60 M5 Instrument console Temperature gauge operation
I just had a E60 M5 instrument display cloned to my 2009 E60 550I and everything works as it did with the original gauge, But now the oil temperature gauge operates like the original vacuum gauge. Is there a way to make it operate as a Oil Temperature gauge again like it did on the M5. I know it can because it did operate correctly before I cloned it and showed the oil Temperature, but also showed many errors on the display. Does anyone know of a program or device I could you to edit the setting in the operation of the display?
"Life is not a journey to the grave with the intention of arriving safely in a pretty and well preserved body, but rather to skid in broadside, thoroughly used up, totally worn out, and loudly proclaiming... -- WOW-- What a Ride!" [author unknown]
Ballin' out of control.
There was work done to alter the instant MPG gauge in the non-M E60 to display oil temperature instead. It involves altering the coding data in Kombi with Tool32. This might help you.
Alpina B3 Flash/BMS OCC/ER CP/ETS 5/HKS BOV/M3 Control Arms
Take it! To the limit 1MT
Could you dumb that down for me a little bit please?
- - - Updated - - -
I don’t know what tool to use to do that. Please advise.
Take it! To the limit 1MT
Actually, I think I figured it out. Thank you very much.
Take it! To the limit 1MT
I found this great program! Perfekt Toolbox.
"Life is not a journey to the grave with the intention of arriving safely in a pretty and well preserved body, but rather to skid in broadside, thoroughly used up, totally worn out, and loudly proclaiming... -- WOW-- What a Ride!" [author unknown]
Posting Permissions
Reply With Quote
Bookmarks