Member
Ok, something weird. A few moments after I start driving, I get a warning about the AUTO HOLD, telling me to stop and then engage the parking brake. Then I get a parking brake malfunction warning, and the "P" gets lit up on my dash. When I park the car, I restart the engine briefly, pulling up on the parking brake switch 3 times to reset, the parking brake engages, code clears, and I am good till the next time I drive. Any ideas?
Is Enabled
BMW Tech Expert
If it were my car I would get a scan of the codes in transmission, engine, and handbrake modules at the least.
-Abel
- E36 328is ~210-220whp: Lots of Mods.
- 2000 Z3: Many Mods.
- 2003 VW Jetta TDI Manual 47-50mpg
- 1999 S52 Estoril M Coupe
- 2014 328d Wagon, self-tuned, 270hp/430ft-lbs
- 2019 M2 Competition, self-tuned, 504whp
- 2016 Mini Cooper S
Member
"handbrake modules"Originally Posted by 328 Power 04
Good luck, OP
If you can leave two black stripes from the exit of one corner to the braking zone of the next, you have enough horsepower. - Mark Donohue
Posting Permissions
Reply With Quote
Bookmarks