So I was putting everything back together in my 745i when I noticed some of the caps on the injectors were missing, I only ordered the orings from BMW since they are the only thing that shows up in the diagrams, any idea where I can buy these caps and washers. (Only 1 of the caps is ok, the rest are broken, like the one on the photo)
Thank you for your time.
6f941970-c431-4f6d-aa5f-972462c4d2a9.jpg
Since out, send them out for a service. IniectoRX. RC. Cruzin. Etc. The flow difference changes vastly, which is quite important for a boosted vehicle
Thank you for answering but I've already sent out my injectors to get cleaned and flow tested to a local shop. In the meanwhile I've found this rebuild kit, do you think this would do?
https://injector-rehab.com/product/b...1-rebuild-kit/
Any shop worth their salt will do that for you.
Bookmarks