Z3 Mesh Wind Deflector (for roll hoop models)

[jmai]

BMW Z3 Mesh Fabric Wind Deflector (fits over roll hoops)

This will fit all Z3s with roll hoops. It fits over the roll hoops and then attaches to the front with two hooks and attaches to the rear through two “keyhole” slots that fit over the Tenex screw. There are two zippers that allow the deflector to be in the down position between the roll hoops. Two nylon spacers are included. These need to be attached under the Tenax screw to allow clearance with the keyhole.

Excellent condition, like new

pictures
https://www.bimmerforums.com/forum/s...3#post30870293

$195 or best offer plus shipping

[jcagle]

Still available? All necessary hardware included?

[jmai]

Still available
All hardware is included. Zippers are fine. No rips or tears in the screens.
I even have the wide spacers that attach to the screws on the front of the boot section. The wide spacers allows the "keyhole" openings to fit correctly

[upchuck57]

Is it still available?

[jmai]

Still available

[jmai]

Sold