Here's the issue,

When I connect my diagnostics (X-Tool D7) the scanner detects power from the car. (My scan tool charges when connected to obd). Although it gets power, i cannot access anything, like the car isn't connected at all. I tried Autocom and an Chinese elm327 and all of them have the same problem. I have noticed that my car doesn't have a round jack under the hood and has only the obd2 jack, as far as I'm aware the car should have them both if I'm not mastaken. I checked the fuses and even changed them even though they are working fine, on obd2 jack 1 pin has 14 volts when the car is on, and 2 pins get about 1 volt. Did anyone experience these problems?