Selling my turbo parts. I built this back at the beginning of 2021. Running it on a NV M50B30 it made 517 whp / 540 wtq after tuning myself, at which point it bent a stock rod.
On to the good part!
Everything is located in Jacksonville, FL - Prices listed for each item left
If shipping is your thing and you want it all I can crate it at work and ship it via freight at your expense.
I am willing to load it in my truck and meet you halfway up to 300 miles for some fuel cost.
I am willing to separate certain items, but would like to keep the manifold, turbo, downpipe, mid-pipe together since they need each other to coexist.
Parts List:
- RSI E30 24v Manifold - Cerakoted Cobalt $400 SOLD
- Custom stainless 3.5" downpipe Cerakoted Cobalt - $400 SOLD
- Custom stainless 3.5" to 3" mid-pipe with recirculated wastegate $350 SOLD
- Turbonetics 60 Series 6162 - T4 .58AR - 3.5" V Band Outlet - $600 SOLD
- eBay TiAL wastegate rebuilt with TiAL diaphrgam - $100 SOLD
- eBay TiAL blow off valve - $50 SOLD
- AMPEFI Boost Control Solenoid - SOLD
- Frozen Boost water to air intercooler kit - Type 3 intercooler - 12x12x2 Heat Exchanger - Davies Craig EBP40 pump - SPAL fan with custom mounting brackets for HE - SOLD
- E30 intercooler mounting brackets - SOLD
- E30 heat exchanger mounting brackets welded to HE - SOLD
- Custom intake piping powdercoated Orbit Blue - SOLD
- Continental flex fuel sensor - SOLD
- Snake Eater Performance 1000cc fuel injectors - serviced February 2022 with flow rates / dead times - $200 SOLD
Megasquirt 2 with custom non vanos M50 harness (batch fire) - Mod'd for: - $900 OBO
- Boost control
- Flex Fuel
- Knock input using KnocksenseMS
- CANBUS
- 2 wire IACV
- VAG R8 coil connectors
- Provisions for hall or VR crank sensor
- Auxillary fuse box that mounts in glove compartment
- Includes full spreadsheet outlining harness and harness labels where necessary
M50B30 - Unhealthy - $600
- Brian Crower Rods
- M54b30 stock pistons
- M54b30 stock crank
- OE Bearings
- OE hardware
- OE rings
- M52 cylinder head with stock valve train
- M50 NV Exhaust cam
- M50 NV Exhaust cam on intake side (machined to align)
- Powdercoated valve cover
- CCV port tapped to 3/4 NPT
- Block tapped to 3/4 NPT for oil drain
- Will not include:
- Oil Filter Housing
- Intake Manifold
- Engine accessories
- Oil pan
See this link for pictures - https://postimg.cc/gallery/x212y7H
Last edited by cokeisgood00; 02-01-2023 at 03:55 PM.
Air to water kit sold
Flex fuel sensor sold
boost solenoid sold
Prices updated for other parts
Still have the MS2 and M50
Bookmarks