Need help finding someone who can code my manual swap. It’s a 95 M3 with Obd1. I swapped in an E46 6spd. I have my programming laptop with ista and inpa etc. I bought an ADS interface and the usb adapter. I’ve seen people successfully using this setup. Let me know if you know of anyone who can help. Thanks.
Try Jed in Stanton. His contact number is:
714-273-9005 and his shop is located in:
10960 Boatman Ave
Stanton CA
Tell him Sol referred you.
Disclaimer:
not related just a satisfied customer
Bookmarks