I've acquired a 188mm LSD from an M3 that I want to install in my 318iS. I have a 6cyl propshaft/driveshaft to go with the diff, my question is can I use my small case axles/half shafts if I swap the output flanges over from the small case diff to the LSD?
Ignore my reply I lied. Here's an old thread on it: https://www.bimmerforums.com/forum/s...o-188mm-diif-Q
Sent from my SM-G975U using Tapatalk
Last edited by XnWarden; 11-29-2022 at 06:53 AM.
Bookmarks