hello again guys, its been a while since i dint post anything... its good to be back, you guys helped me alot on the last years, and I miss all this world...
so here we go again, my last engine didnt survive much, I didnt touch the car for a long time, but now decided build a new engine
The engine specs are:
M50B25TU Block
85mm forged pistons
135mm forged rods
M52B28 crankshaft
KS rod/main bearings
all ARP hardware
head is all stock, just rebuilded
the bottom end is already done, just waiting for the head to assembly everything
WhatsApp Image 2022-11-24 at 15.33.01.jpegWhatsApp Image 2022-11-24 at 15.33.01 (1).jpeg
already painted the engine bay too
WhatsApp Image 2022-11-24 at 15.33.01 (2).jpeg
I have a question, someone already removed the water plug on the front engine cover?
I dont have water heater lines, already plugged the water port on the back of the head, dont have water on the throttle body, and since the car will have a custom radiador I can do without this hose, since it just came directly from the engine cover to the bottom of the radiator, and is one less hose to leak...
s-l500.jpg
can just cut and weld...
hello guys, how are you?
made some progress on last days, engine is on the bay..
WhatsApp Image 2022-12-29 at 16.37.06 (2).jpeg
hope the getrag can hold a little boost, is hard to find zf here...
WhatsApp Image 2022-12-29 at 16.42.24.jpeg
blocked the water hose that I mentioned
WhatsApp Image 2022-12-29 at 16.37.06 (5).jpeg
isnt a easy job, dont know how much it weights but...
WhatsApp Image 2022-12-29 at 16.37.06.jpeg
oil filter, tensioners and engine belt done, just waiting the head to start wiring the ecu
hope I can start it soon hehe
happy new year for all!
Bookmarks