Hi all, when changing my oil filter housing gasket I found two pieces that I did not see from where they came. Can ya help me out?!
https://drive.google.com/file/d/12eY...e-vivWuL1i_ZrL
https://drive.google.com/file/d/1o5W...w?usp=drivesdk
Thank you!
Answers revealed!
https://drive.google.com/file/d/1P87...w?usp=drivesdk
and
https://drive.google.com/file/d/1nwv...w?usp=drivesdk
but I’m still not sure how the ‘compensator’ gets installed. Any pics to share? Thank you!
I vaguely remember the grommet for the turbo inlet tube support hole that I think is on the front of the engine but I don’t recall the stubby part that is #7 on the radiator stack diagram.
Compensator pics, it’s on the last piece of plastic before gaining access to the radiators. It pops into a little hole - there’s one on each side.
https://drive.google.com/file/d/1LHC...w?usp=drivesdk
https://drive.google.com/file/d/1FBY...w?usp=drivesdk
Bookmarks