Style 166M staggered set bored for e39 fitment w/tires

[rxcess]

I have a set of Style 166M from an E60 M5 that have the center bore machined to 74.1 mm to fit e39. They fit perfectly with no rubbing issues on a stock suspension, no spacers required. Tires are in good condition about 5-6/32nd tread depth, honestly I would replace them if I were keeping the wheels and they will add to the shipping cost. Willing to sell with or without tires. Shipping is at buyer cost.

Front Wheels - BMW PN 36117834625, 19x8.5, et12, CB 74.1, 245/35R19 Falken FK452
Rear Wheels - BMW PN 36117834626, 19x9.5, et28, CB 74.1, 275/30R19 Falken FK452

Wheels have the original finish and are good condition, there are some light scratches and stone chips.

Will work on a still E60, but you will need hub centric rings to bring them back to e60 center bore. Rings are available from many sources.

PM me for pictures of the rims mounted on an e39.

$900 or best offer


Thanks,

Eric

https://drive.google.com/file/d/1Lpw...usp=share_link
https://drive.google.com/file/d/1sEU...usp=share_link
https://drive.google.com/file/d/1Vbf...usp=share_link
https://drive.google.com/file/d/1v3N...usp=share_link

[rxcess]

bump - pic's added

[rxcess]

Sold.