LCM IV - Fogs stay on with high beams?

[roarf]

Is it possible to code this feature on a LCM IV? NavCoder has a check box for it, but the setting refuses to stick. PA Soft doesn't even list it as an option to check/uncheck. Do I need to use NCS Expert, or is this just not a feature in the LCM IV? Car in question is a 2002 M5 and I replaced the LCM IIIb with the LCM IV. Any help is appreciated.

[Miss BimmerLV]

Hi there ...

This was one of the first things I wanted to do with my E38 when i first got one. You will need to use NCS expert in conjunction with NCS Dummy if you dont speak Deutsch. You must click the corresponding box within the correct module of the LCM version IV, in this case "LCM.C18" in order for the request to stick ...I think I did a D.I.Y on it a looooooooooong time ago on the E38 sub forums.

Setup the routine as Fogs Lamps being able to operate along with High Beams. DONE!

And dont forget to use EDIABAS 7 for the interface!

Hope this helps!

24.JPG

[roarf]

That option worked. Thanks.