Hi would appreciate some help
I have replaced both the front brake hoses as i was having severe binding on the front discs, and sure enough the hoses were solid with debris, the problem i am faced with is i cannot get any fluid to come through the front brakes at all, the rear brakes bleed fine and ive used both ista and inpa dsc bleed cycle, but still cannot get any fluid to come through the new hoses, would appreciate some help please as i am guessing this can only be something i am doing wrong or there is another procedure i am missing.
Do you think the calipers might be clogged as well? I don’t think your procedure is wrong.
Bookmarks