I can't seem to find the size/diameter for the radiator Hoses online and I don't want to take it off yet since I use the car every day does anyone know what the inside diameter is?
ETK only shows the size of the hose clamps, unfortunately I scrapped my old radiator hoses, but I have an old M70 radiator here and measured, outer dia. of the plastic hose connections of radiator ~ 41.5mm, inner dia. ~33.0mm
Shogun tricks and tips for the E32 series are HERE!
I have both radiator hoses waiting to install on my 750iL. I'll get you measurements later today!
Edit:
Hose end sizes are 39mm and 43mm. See photo for orientation. I'd say +/- 0.5mm because I measured with garbage calipers
PXL_20220912_233128333~2.jpg
Last edited by BeeW; 09-12-2022 at 07:37 PM.
1990 750iL BronzitBeige Metallic
2001 325cic OrientBlau
Any recommendation for installing silicon hoses?
Sent from my SM-G955U using Tapatalk
I tend to avoid silicone hoses because they're very water permeable relative to rubber and will eventually sweat coolant through the hose walls. On my other car, this happened in less than 4 years.
Rubber lasts about 20 years and handles the heat just fine.
It's a material best used for intake components
1990 750iL BronzitBeige Metallic
2001 325cic OrientBlau
Thanks for the info
Sent from my SM-G955U using Tapatalk
Bookmarks