Hi there,
I'm having a rather odd gremlin, my E38's PDC system is acting up. It worked fine in the morning when i was parking the car but didn't in the evening and hasn't worked since then.
Now I've had sensors fail in the past and the system give me the long beep when PDC is activated. But this time, the PDC system just doesn't turn on at all. No light on the PDC button, no beeping, no turning on in reverse, nothing
I checked the fuse and the fuse is fine, replaced it and tested and still nothing. Is the PDC module dead? How should I troubleshoot this?
I tried hooking up to the car with PA soft but the PDC module doesn't show up (it's greyed out).
Any advice appreciated.
TIA
Certainly sounds like a dead module, or you’ve lost powers/grounds to it somewhere.
Sent from my iPhone using Tapatalk
If I am reading the WDS right, it goes Iggy switch, Fuse 19, uniloader relay in trunk (3rd from right), Fuse 64, PDC module. The uniloader relay also handles things like rear hvac control and cigarette lighter, so if those things are working, it would rule out that relay and Fuse 19. I've never had a bad PDC module, or really ever heard of it before, but it shows to sit under the row of fuses in the trunk. It has a two 12 pin connections. You should be getting power on pin one of the black connector.
A81, X18013
in rear RH side of luggage compartment
A81 Parking aid control unit
A81 Parking aid control unit X18013 Component connector (26-pin, red), Parking aid control unit
Plug connector overview
Pin assignments at plug connector X300
Number X-pin, colour Description X300 12-pin, black Plug connector Parking aid control unit X18013 12-pin, natural Plug connector Parking aid control unit
Pin assignments at plug connector X18013
Pin Type Description / Signal type Connection /
Measuring notes1 E Voltage supply, terminal 15 Fuse F64 2 A PDC loudspeaker activation Parking aid speaker 3 Not used 4 E/A I/K-bus signal link Connector, I/K-bus 5 Not used 6 M Terminal 31 Ground point 7 A Parking aid indicator lamp Switching centre 8 M Ground for PDC loudspeaker Parking aid speaker 9 A Parking aid speaker Gong 10 A Signal, parking aid switch Switching centre 11 A Reversing light signal Gong 12 Not used
Pin Type Description / Signal type Connection /
Measuring notes1 M Ground, rear centre left converter Rear centre left converter 2 M Ground, rear right converter Rear right converter 3 M Ground, rear left converter Rear left converter 4 A Positive activation, rear centre right converter Rear centre right converter 5 A Positive activation, rear centre left converter Rear centre left converter 6 A Positive activation, rear right converter Rear right converter 7 M Ground, rear centre right converter Rear centre right converter 8 A Signal line, rear centre right converter Rear centre right converter 9 A Signal line, rear centre left converter Rear centre left converter 10 A Signal line, rear right converter Rear right converter 11 A Signal line, rear left converter Rear left converter 12 A Positive activation, rear left converter Rear left converter
Thank you for this. I finally got some time to work on this. I pulled the PDC module out and looks like it has 3 plugs going to it. I did unplug the black one and I am getting power to pin 1. So i guess that rules that out.
I have a replacement PDC module on it's way, in the meantime if anyone else has any ideas on what to try, please let me know!
If you have issues with the light control module, it plays games with pdc. My LKM has been acting up, and when it does, pdc dies
Bookmarks