Hello please help me i have tried everything but i always get the following error:
FA-Fehler COAPI-2000: Fehler in EDIABAS oder in SG-Beschreibungsdatei
BIP-0001: Zu langer Job-Parameter oder String-Register-Zugriff
CAS COAPI-2000: Fehler in EDIABAS oder in SG-Beschreibungsdatei
FA_READ COAPI-2000: Fehler in EDIABAS oder in SG-Beschreibungsdatei
FA_READ: A_E65CAS
It reads my VIN in FG correctly but adds another number 7 next to it. INPA works fine.
I would really appriciate any help!
I will assume this is for an E65?
You probably need to update your NCS Expert daten files for that chassis.
The VIN is fine, as the last digit is a calculated checksum.
-Abel
- E36 328is ~210-220whp: Lots of Mods.
- 2000 Z3: Many Mods.
- 2003 VW Jetta TDI Manual 47-50mpg
- 1999 S52 Estoril M Coupe
- 2014 328d Wagon, self-tuned, 270hp/430ft-lbs
- 2019 M2 Competition, self-tuned, 504whp
- 2016 Mini Cooper S
I tried several daten files but nothing works… no it is for e61 (e60). Do you recommend any specific daten files? I am new to coding.
Does it do the same when you try to get the base coding from the other module, LCM (or whatever it is on E61) instead of CAS?
-Abel
- E36 328is ~210-220whp: Lots of Mods.
- 2000 Z3: Many Mods.
- 2003 VW Jetta TDI Manual 47-50mpg
- 1999 S52 Estoril M Coupe
- 2014 328d Wagon, self-tuned, 270hp/430ft-lbs
- 2019 M2 Competition, self-tuned, 504whp
- 2016 Mini Cooper S
If i choose LMA, error pops up: following feature is invalid for Fa: $528
Oh ya, your daten is old then
-Abel
- E36 328is ~210-220whp: Lots of Mods.
- 2000 Z3: Many Mods.
- 2003 VW Jetta TDI Manual 47-50mpg
- 1999 S52 Estoril M Coupe
- 2014 328d Wagon, self-tuned, 270hp/430ft-lbs
- 2019 M2 Competition, self-tuned, 504whp
- 2016 Mini Cooper S
Bookmarks